Re: [PATCH v2] dmaengine: qcom: gpi: Fix SE ID and SE Protocol fields widths in SCRATCH_0

[Konrad Dybcio]

On 7/21/26 1:15 PM, Chandana Kishori Chiluveru wrote:
> GPII_n_CH_k_SCRATCH_0_SEID is currently defined as GENMASK(2, 0), only
> 3 bits wide. Serial engine indices >= 8 get silently truncated by
> FIELD_PREP()/u32_encode_bits() when written into the scratch register,
> causing the GPI channel to bind to the wrong serial engine. The
> channel allocate command still succeeds (it doesn't require the
> target SE to respond), but the subsequent channel start command times
> out waiting for hardware to complete the handoff to the (incorrectly
> bound) SE, and gpi_send_cmd() returns -EIO leading to GSI usecase failures
> for SE8 and SE9 serial engines.
> 
> Older documentation, such as the SDM845 hardware programming guide,
> describes the SE ID field as bits [2:0]. More recent QUP hardware
> documentation defines the field as bits [3:0]. Use the wider definition
> to match current hardware documentation while remaining compatible with
> existing platforms and enabling serial engine IDs greater than 7.
> 
> Also update the SE Protocol field definition to match the documented
> register layout and keep both fields correctly packed.
> 
> Fixes: 5d0c3533a19f ("dmaengine: qcom: Add GPI dma driver")
> Signed-off-by: Chandana Kishori Chiluveru <chandana.chiluveru@xxxxxxxxxxxxxxxx>
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>

Konrad