[PATCH] net: marvell: mvpp2: Convert to the new PCS API
From: Maxime Chevallier
Date: Tue Jul 21 2026 - 07:52:57 EST
Following the introduction of the PCS framework, port mvpp2 to the new
PCS API.
Signed-off-by: Maxime Chevallier <maxime.chevallier@xxxxxxxxxxx>
---
.../net/ethernet/marvell/mvpp2/mvpp2_main.c | 161 +++++++++++-------
1 file changed, 95 insertions(+), 66 deletions(-)
diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
index ccc24a1301f2..8d9663c7a023 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
@@ -6499,21 +6499,6 @@ static void mvpp2_gmac_config(struct mvpp2_port *port, unsigned int mode,
writel(ctrl4, port->base + MVPP22_GMAC_CTRL_4_REG);
}
-static struct phylink_pcs *mvpp2_select_pcs(struct phylink_config *config,
- phy_interface_t interface)
-{
- struct mvpp2_port *port = mvpp2_phylink_to_port(config);
-
- /* Select the appropriate PCS operations depending on the
- * configured interface mode. We will only switch to a mode
- * that the validate() checks have already passed.
- */
- if (mvpp2_is_xlg(interface))
- return &port->pcs_xlg;
- else
- return &port->pcs_gmac;
-}
-
static int mvpp2_mac_prepare(struct phylink_config *config, unsigned int mode,
phy_interface_t interface)
{
@@ -6786,7 +6771,6 @@ static int mvpp2_mac_enable_tx_lpi(struct phylink_config *config, u32 timer,
}
static const struct phylink_mac_ops mvpp2_phylink_ops = {
- .mac_select_pcs = mvpp2_select_pcs,
.mac_prepare = mvpp2_mac_prepare,
.mac_config = mvpp2_mac_config,
.mac_finish = mvpp2_mac_finish,
@@ -6808,7 +6792,10 @@ static void mvpp2_acpi_start(struct mvpp2_port *port)
};
struct phylink_pcs *pcs;
- pcs = mvpp2_select_pcs(&port->phylink_config, port->phy_interface);
+ if (mvpp2_is_xlg(port->phy_interface))
+ pcs = &port->pcs_xlg;
+ else
+ pcs = &port->pcs_gmac;
mvpp2_mac_prepare(&port->phylink_config, MLO_AN_INBAND,
port->phy_interface);
@@ -6823,6 +6810,78 @@ static void mvpp2_acpi_start(struct mvpp2_port *port)
SPEED_UNKNOWN, DUPLEX_UNKNOWN, false, false);
}
+static int mvpp2_port_fill_pcs(struct phylink_config *config,
+ struct phylink_pcs **available_pcs,
+ unsigned int num_possible_pcs)
+{
+ struct mvpp2_port *port = mvpp2_phylink_to_port(config);
+
+ available_pcs[0] = &port->pcs_gmac;
+
+ if (mvpp2_port_supports_xlg(port)) {
+ if (num_possible_pcs < 2)
+ return -EINVAL;
+
+ available_pcs[1] = &port->pcs_xlg;
+ }
+
+ return 0;
+}
+
+static void mvpp2_port_init_pcs_xlg(struct phylink_pcs *pcs, bool has_comphy,
+ phy_interface_t phy_mode)
+{
+ if (has_comphy) {
+ __set_bit(PHY_INTERFACE_MODE_5GBASER,
+ pcs->supported_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_10GBASER,
+ pcs->supported_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_XAUI,
+ pcs->supported_interfaces);
+ } else if (phy_mode == PHY_INTERFACE_MODE_5GBASER) {
+ __set_bit(PHY_INTERFACE_MODE_5GBASER,
+ pcs->supported_interfaces);
+ } else if (phy_mode == PHY_INTERFACE_MODE_10GBASER) {
+ __set_bit(PHY_INTERFACE_MODE_10GBASER,
+ pcs->supported_interfaces);
+ } else if (phy_mode == PHY_INTERFACE_MODE_XAUI) {
+ __set_bit(PHY_INTERFACE_MODE_XAUI,
+ pcs->supported_interfaces);
+ }
+}
+
+static void mvpp2_port_init_pcs_gmac(struct phylink_pcs *pcs, bool has_comphy,
+ phy_interface_t phy_mode)
+{
+ if (has_comphy) {
+ /* If a COMPHY is present, we can support any of the
+ * serdes modes and switch between them.
+ */
+ __set_bit(PHY_INTERFACE_MODE_SGMII,
+ pcs->supported_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_1000BASEX,
+ pcs->supported_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_2500BASEX,
+ pcs->supported_interfaces);
+ } else if (phy_mode == PHY_INTERFACE_MODE_2500BASEX) {
+ /* No COMPHY, with only 2500BASE-X mode supported */
+ __set_bit(PHY_INTERFACE_MODE_2500BASEX,
+ pcs->supported_interfaces);
+ } else if (phy_mode == PHY_INTERFACE_MODE_1000BASEX ||
+ phy_mode == PHY_INTERFACE_MODE_SGMII) {
+ /* No COMPHY, we can switch between 1000BASE-X and SGMII
+ */
+ __set_bit(PHY_INTERFACE_MODE_1000BASEX,
+ pcs->supported_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_SGMII,
+ pcs->supported_interfaces);
+ }
+
+ /* RGMII and MII are still routed through the gmac PCS */
+ phy_interface_set_rgmii(pcs->supported_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_MII, pcs->supported_interfaces);
+}
+
/* In order to ensure backward compatibility for ACPI, check if the port
* firmware node comprises the necessary description allowing to use phylink.
*/
@@ -7082,28 +7141,17 @@ static int mvpp2_port_probe(struct platform_device *pdev,
port->phylink_config.mac_capabilities |=
MAC_SYM_PAUSE | MAC_ASYM_PAUSE;
- if (mvpp2_port_supports_xlg(port)) {
- /* If a COMPHY is present, we can support any of
- * the serdes modes and switch between them.
- */
- if (comphy) {
- __set_bit(PHY_INTERFACE_MODE_5GBASER,
- port->phylink_config.supported_interfaces);
- __set_bit(PHY_INTERFACE_MODE_10GBASER,
- port->phylink_config.supported_interfaces);
- __set_bit(PHY_INTERFACE_MODE_XAUI,
- port->phylink_config.supported_interfaces);
- } else if (phy_mode == PHY_INTERFACE_MODE_5GBASER) {
- __set_bit(PHY_INTERFACE_MODE_5GBASER,
- port->phylink_config.supported_interfaces);
- } else if (phy_mode == PHY_INTERFACE_MODE_10GBASER) {
- __set_bit(PHY_INTERFACE_MODE_10GBASER,
- port->phylink_config.supported_interfaces);
- } else if (phy_mode == PHY_INTERFACE_MODE_XAUI) {
- __set_bit(PHY_INTERFACE_MODE_XAUI,
- port->phylink_config.supported_interfaces);
- }
+ if (!mvpp2_port_supports_xlg(port))
+ port->phylink_config.num_possible_pcs = 1;
+ else
+ port->phylink_config.num_possible_pcs = 2;
+
+ port->phylink_config.fill_available_pcs = mvpp2_port_fill_pcs;
+ mvpp2_port_init_pcs_xlg(&port->pcs_xlg, comphy, phy_mode);
+ mvpp2_port_init_pcs_gmac(&port->pcs_gmac, comphy, phy_mode);
+
+ if (mvpp2_port_supports_xlg(port)) {
if (comphy)
port->phylink_config.mac_capabilities |=
MAC_10000FD | MAC_5000FD;
@@ -7115,35 +7163,16 @@ static int mvpp2_port_probe(struct platform_device *pdev,
MAC_10000FD;
}
- if (mvpp2_port_supports_rgmii(port)) {
- phy_interface_set_rgmii(port->phylink_config.supported_interfaces);
- __set_bit(PHY_INTERFACE_MODE_MII,
- port->phylink_config.supported_interfaces);
- }
+ phy_interface_copy(port->phylink_config.pcs_interfaces,
+ port->pcs_gmac.supported_interfaces);
- if (comphy) {
- /* If a COMPHY is present, we can support any of the
- * serdes modes and switch between them.
- */
- __set_bit(PHY_INTERFACE_MODE_SGMII,
- port->phylink_config.supported_interfaces);
- __set_bit(PHY_INTERFACE_MODE_1000BASEX,
- port->phylink_config.supported_interfaces);
- __set_bit(PHY_INTERFACE_MODE_2500BASEX,
- port->phylink_config.supported_interfaces);
- } else if (phy_mode == PHY_INTERFACE_MODE_2500BASEX) {
- /* No COMPHY, with only 2500BASE-X mode supported */
- __set_bit(PHY_INTERFACE_MODE_2500BASEX,
- port->phylink_config.supported_interfaces);
- } else if (phy_mode == PHY_INTERFACE_MODE_1000BASEX ||
- phy_mode == PHY_INTERFACE_MODE_SGMII) {
- /* No COMPHY, we can switch between 1000BASE-X and SGMII
- */
- __set_bit(PHY_INTERFACE_MODE_1000BASEX,
- port->phylink_config.supported_interfaces);
- __set_bit(PHY_INTERFACE_MODE_SGMII,
- port->phylink_config.supported_interfaces);
- }
+ if (mvpp2_port_supports_xlg(port))
+ phy_interface_or(port->phylink_config.pcs_interfaces,
+ port->phylink_config.pcs_interfaces,
+ port->pcs_xlg.supported_interfaces);
+
+ phy_interface_copy(port->phylink_config.supported_interfaces,
+ port->phylink_config.pcs_interfaces);
phylink = phylink_create(&port->phylink_config, port_fwnode,
phy_mode, &mvpp2_phylink_ops);
--
2.55.0