[PATCH v2 09/10] arm64: dts: qcom: pmih0108: Enable BCL sensor node
From: Manaf Meethalavalappu Pallikunhi
Date: Tue Jul 21 2026 - 14:51:51 EST
Add Battery Current Limiting (BCL) hardware monitor node for pmih0108
PMIC. The BCL monitors battery voltage and current, providing hardware
interrupts when configurable thresholds are violated.
Signed-off-by: Manaf Meethalavalappu Pallikunhi <manaf.pallikunhi@xxxxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/pmih0108.dtsi | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/pmih0108.dtsi b/arch/arm64/boot/dts/qcom/pmih0108.dtsi
index 1c875995d881..1f91e788010b 100644
--- a/arch/arm64/boot/dts/qcom/pmih0108.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmih0108.dtsi
@@ -49,6 +49,15 @@ pmih0108_temp_alarm: temp-alarm@a00 {
#thermal-sensor-cells = <0>;
};
+ sensor@4700 {
+ compatible = "qcom,pmih0108-bcl";
+ reg = <0x4700>;
+ interrupts = <0x7 0x47 0x0 IRQ_TYPE_EDGE_RISING>,
+ <0x7 0x47 0x1 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "max-min",
+ "critical";
+ };
+
pmih0108_gpios: gpio@8800 {
compatible = "qcom,pmih0108-gpio", "qcom,spmi-gpio";
reg = <0x8800>;
--
2.43.0