Re: [PATCH v2 0/2] power: supply: max8903: add DC and USB input current-limit GPIO controls

[Sebastian Reichel]

On Fri, 05 Jun 2026 11:18:11 +0200, Herman van Hazendonk wrote:
> v2 addresses two rounds of reviewer feedback on v1.
> 
> Sebastian Reichel (1 finding):
>  - Drop usb-current-limit-values DT property. The IUSB pin is
>    silicon-fixed at 100/500 mA per the MAX8903 datasheet Pin
>    Description ("Drive IUSB logic-low to set the USB current limit
>    to 100mA. Drive IUSB logic-high to set the USB current limit to
>    500mA."), so there's nothing board-specific to expose. The two
>    values are bound to MAX8903_USB_CURRENT_LIMIT_{LOW,HIGH}_UA
>    #defines in the driver with the datasheet quote in a header
>    comment; usb-current-limit-gpios stays as the board parameter.
> 
> [...]

Applied, thanks!

[1/2] dt-bindings: power: supply: maxim,max8903: add DC and USB input current-limit controls
      commit: 353438b3107d56e36a642f117c2b4accc963abbd
[2/2] power: supply: max8903: add DC and USB input current-limit GPIO controls
      commit: 828414660052b629378764e5d5c1f07e60716a48

Best regards,
-- 
Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>