[PATCH v4 2/3] riscv: dts: sophgo: cv180x: Add PWR_GPIO controller

[Chen-Yu Yeh]

The CV180x/CV181x family has an additional DesignWare APB GPIO
controller (PWR_GPIO) located in the always-on power domain at
0x5021000. Add the node so that boards can reference GPIOs in this
bank, such as status LEDs.

Signed-off-by: Chen-Yu Yeh <chenyou910331@xxxxxxxxx>
---
Changes since v3:
- Move the pwr_gpio node to follow unit-address ordering (Inochi Amaoto)

 arch/riscv/boot/dts/sophgo/cv180x.dtsi | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/arch/riscv/boot/dts/sophgo/cv180x.dtsi b/arch/riscv/boot/dts/sophgo/cv180x.dtsi
index 06b0ce5a2db7..8bf67ee4eca5 100644
--- a/arch/riscv/boot/dts/sophgo/cv180x.dtsi
+++ b/arch/riscv/boot/dts/sophgo/cv180x.dtsi
@@ -448,6 +448,24 @@ usb: usb@4340000 {
 			status = "disabled";
 		};
 
+		gpio4: gpio@5021000 {
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x5021000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			porte: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				ngpios = <32>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <SOC_PERIPHERAL_IRQ(54) IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
 		rtc@5025000 {
 			compatible = "sophgo,cv1800b-rtc", "syscon";
 			reg = <0x5025000 0x2000>;
-- 
2.43.0