[PATCH 3/6] ARM: dts: stm32: Use DMA FIFO mode for all spi in stm32mp151

[Alain Volmat]

When used, configure the DMA in FIFO mode (instead of Direct) for all
SPI instances of stm32mp151.dtsi

Signed-off-by: Alain Volmat <alain.volmat@xxxxxxxxxxx>
---
 arch/arm/boot/dts/st/stm32mp151.dtsi | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/arm/boot/dts/st/stm32mp151.dtsi b/arch/arm/boot/dts/st/stm32mp151.dtsi
index 84f68e8563d85..e7fec8b49ae16 100644
--- a/arch/arm/boot/dts/st/stm32mp151.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp151.dtsi
@@ -943,8 +943,8 @@ spi2: spi@4000b000 {
 				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&rcc SPI2_K>;
 				resets = <&rcc SPI2_R>;
-				dmas = <&dmamux1 39 0x400 0x05>,
-				       <&dmamux1 40 0x400 0x05>;
+				dmas = <&dmamux1 39 0x400 0x01>,
+				       <&dmamux1 40 0x400 0x01>;
 				dma-names = "rx", "tx";
 				access-controllers = <&etzpc 27>;
 				status = "disabled";
@@ -970,8 +970,8 @@ spi3: spi@4000c000 {
 				interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&rcc SPI3_K>;
 				resets = <&rcc SPI3_R>;
-				dmas = <&dmamux1 61 0x400 0x05>,
-				       <&dmamux1 62 0x400 0x05>;
+				dmas = <&dmamux1 61 0x400 0x01>,
+				       <&dmamux1 62 0x400 0x01>;
 				dma-names = "rx", "tx";
 				access-controllers = <&etzpc 28>;
 				status = "disabled";
@@ -1301,8 +1301,8 @@ spi1: spi@44004000 {
 				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&rcc SPI1_K>;
 				resets = <&rcc SPI1_R>;
-				dmas = <&dmamux1 37 0x400 0x05>,
-				       <&dmamux1 38 0x400 0x05>;
+				dmas = <&dmamux1 37 0x400 0x01>,
+				       <&dmamux1 38 0x400 0x01>;
 				dma-names = "rx", "tx";
 				access-controllers = <&etzpc 52>;
 				status = "disabled";
@@ -1316,8 +1316,8 @@ spi4: spi@44005000 {
 				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&rcc SPI4_K>;
 				resets = <&rcc SPI4_R>;
-				dmas = <&dmamux1 83 0x400 0x05>,
-				       <&dmamux1 84 0x400 0x05>;
+				dmas = <&dmamux1 83 0x400 0x01>,
+				       <&dmamux1 84 0x400 0x01>;
 				dma-names = "rx", "tx";
 				access-controllers = <&etzpc 53>;
 				status = "disabled";
@@ -1432,8 +1432,8 @@ spi5: spi@44009000 {
 				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&rcc SPI5_K>;
 				resets = <&rcc SPI5_R>;
-				dmas = <&dmamux1 85 0x400 0x05>,
-				       <&dmamux1 86 0x400 0x05>;
+				dmas = <&dmamux1 85 0x400 0x01>,
+				       <&dmamux1 86 0x400 0x01>;
 				dma-names = "rx", "tx";
 				access-controllers = <&etzpc 57>;
 				status = "disabled";

-- 
2.34.1