[PATCH V4 1/4] arm64: dts: qcom: glymur-crd: Update VREG l2b_e0 and l9b_e0 voltage for SD-card

[Monish Chunara]

From: Kamal Wadhwa <kamal.wadhwa@xxxxxxxxxxxxxxxx>

SD cards may need 1.8v VDDIO also to be supported, to accommodate this
requirement reduce the min voltage to 1.8v for `vreg_l2b_e0` which
supplies to VDDIO pin of SD card.

NOTE - Since this SD card is the only client on this regulator, this
change should not have any side effect on any other clients.
moreover, SD card driver takes care to explicitly vote for the
regulator voltage based on the SD card detection sequence.

Also for stable operation of the SD card increase VDD voltage
supplied by `vreg_l9b_e0` to 2.96v.

Signed-off-by: Kamal Wadhwa <kamal.wadhwa@xxxxxxxxxxxxxxxx>
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxxxxxxxx>
Signed-off-by: Monish Chunara <monish.chunara@xxxxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/glymur-crd.dtsi | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/glymur-crd.dtsi b/arch/arm64/boot/dts/qcom/glymur-crd.dtsi
index b314c6dd423c..2e41b4ec83a5 100644
--- a/arch/arm64/boot/dts/qcom/glymur-crd.dtsi
+++ b/arch/arm64/boot/dts/qcom/glymur-crd.dtsi
@@ -373,7 +373,7 @@ vreg_l1b_e0_1p8: ldo1 {
 
 		vreg_l2b_e0_2p9: ldo2 {
 			regulator-name = "vreg_l2b_e0_2p9";
-			regulator-min-microvolt = <2904000>;
+			regulator-min-microvolt = <1804000>;
 			regulator-max-microvolt = <2904000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
@@ -392,10 +392,10 @@ vreg_l8b_e0_1p50: ldo8 {
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l9b_e0_2p7: ldo9 {
-			regulator-name = "vreg_l9b_e0_2p7";
-			regulator-min-microvolt = <2704000>;
-			regulator-max-microvolt = <2704000>;
+		vreg_l9b_e0_2p9: ldo9 {
+			regulator-name = "vreg_l9b_e0_2p9";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-- 
2.34.1