Re: [PATCH v7 3/7] iio: adc: mcp3564: Add support for spi-device-addr

[Conor Dooley]

On Wed, Jul 22, 2026 at 09:54:15AM +0200, Janani Sunil wrote:
> Read the generic spi-device-addr property when determining the hardware
> device address. Fall back to the deprecated microchip,hw-device-address
> property to preserve compatibility with existing device trees.
> 
> The device address remains 1 when neither property is present.
> 
> Signed-off-by: Janani Sunil <janani.sunil@xxxxxxxxxx>
> ---
>  drivers/iio/adc/mcp3564.c | 4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/iio/adc/mcp3564.c b/drivers/iio/adc/mcp3564.c
> index 36675563829e..71deb05e878e 100644
> --- a/drivers/iio/adc/mcp3564.c
> +++ b/drivers/iio/adc/mcp3564.c
> @@ -1122,7 +1122,9 @@ static int mcp3564_config(struct iio_dev *indio_dev, bool *use_internal_vref_att
>  	 * addresses are available when multiple devices are present on the same
>  	 * SPI bus with only one Chip Select line for all devices.
>  	 */
> -	device_property_read_u32(dev, "microchip,hw-device-address", &tmp);
> +	ret = device_property_read_u32(dev, "spi-device-addr", &tmp);
> +	if (ret)
> +		device_property_read_u32(dev, "microchip,hw-device-address", &tmp);

Same on this one, shouldn't it check the return value so that the below
check of temp > 3 doesn't just pass with the default value of tmp?

>  
>  	if (tmp > 3) {
>  		dev_err_probe(dev, tmp,
> 
> -- 
> 2.43.0
>

Attachment: signature.asc
Description: PGP signature