Re: [PATCH net-next v6 0/2] net: dsa: realtek: rtl8365mb: add SGMII/HSGMII support for RTL8367S

[patchwork-bot+netdevbpf]

Hello:

This series was applied to netdev/net-next.git (main)
by Jakub Kicinski <kuba@xxxxxxxxxx>:

On Sat, 11 Jul 2026 23:31:57 -0500 you wrote:
> The RTL8367S is a 5+2 port switch from the same family as the
> RTL8365MB-VC already supported by this driver. Its chip info table
> entry declares SGMII and HSGMII on external interface 1, but the
> driver so far only implements RGMII, leaving boards that wire the
> switch to the CPU over the SerDes without a working CPU port.
> 
> This series implements both modes. The configuration sequence and the
> SerDes tuning parameters are derived from the GPL-licensed Realtek
> rtl8367c vendor driver, as distributed in the Mercusys MR80X GPL code
> drop, and cross-checked against the real register sequence captured at
> runtime by chainloading a custom U-Boot ahead of the stock firmware
> and logging the live SerDes accesses on hardware.
> 
> [...]

Here is the summary with links:
  - [net-next,v6,1/2] net: dsa: realtek: rtl8365mb: add SGMII support for RTL8367S
    https://git.kernel.org/netdev/net-next/c/0b577e2fe06c
  - [net-next,v6,2/2] net: dsa: realtek: rtl8365mb: add HSGMII support for RTL8367S
    https://git.kernel.org/netdev/net-next/c/987137345f33

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html