[PATCH v7 2/4] clk: sunxi-ng: div: add read-only operation support

[Jerome Brunet]

Add support for sunxi-ng read-only dividers. This will be
useful to the a733 oscillator detection logic.

Reviewed-by: Chen-Yu Tsai <wens@xxxxxxxxxx>
Signed-off-by: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
---
 drivers/clk/sunxi-ng/ccu_div.c | 31 +++++++++++++++++++++++++++++--
 drivers/clk/sunxi-ng/ccu_div.h |  1 +
 2 files changed, 30 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/sunxi-ng/ccu_div.c b/drivers/clk/sunxi-ng/ccu_div.c
index 62d680ccb524..c385e0160f13 100644
--- a/drivers/clk/sunxi-ng/ccu_div.c
+++ b/drivers/clk/sunxi-ng/ccu_div.c
@@ -20,8 +20,22 @@ static int ccu_div_determine_rate_helper(struct ccu_mux_internal *mux,
 	if (cd->common.features & CCU_FEATURE_FIXED_POSTDIV)
 		req->rate *= cd->fixed_post_div;
 
-	ret = divider_determine_rate(&cd->common.hw, req, cd->div.table,
-				     cd->div.width, cd->div.flags);
+	if (cd->div.flags & CLK_DIVIDER_READ_ONLY) {
+		unsigned long val;
+		u32 reg;
+
+		reg = readl(cd->common.base + cd->common.reg);
+		val = reg >> cd->div.shift;
+		val &= (1 << cd->div.width) - 1;
+
+		ret = divider_ro_determine_rate(&cd->common.hw, req, cd->div.table,
+						cd->div.width, cd->div.flags, val);
+
+	} else {
+		ret = divider_determine_rate(&cd->common.hw, req, cd->div.table,
+					     cd->div.width, cd->div.flags);
+	}
+
 	if (ret)
 		return ret;
 
@@ -143,3 +157,16 @@ const struct clk_ops ccu_div_ops = {
 	.set_rate	= ccu_div_set_rate,
 };
 EXPORT_SYMBOL_NS_GPL(ccu_div_ops, "SUNXI_CCU");
+
+const struct clk_ops ccu_rodiv_ops = {
+	.disable	= ccu_div_disable,
+	.enable		= ccu_div_enable,
+	.is_enabled	= ccu_div_is_enabled,
+
+	.get_parent	= ccu_div_get_parent,
+	.set_parent	= ccu_div_set_parent,
+
+	.determine_rate	= ccu_div_determine_rate,
+	.recalc_rate	= ccu_div_recalc_rate,
+};
+EXPORT_SYMBOL_NS_GPL(ccu_rodiv_ops, "SUNXI_CCU");
diff --git a/drivers/clk/sunxi-ng/ccu_div.h b/drivers/clk/sunxi-ng/ccu_div.h
index be00b3277e97..a30a92780a05 100644
--- a/drivers/clk/sunxi-ng/ccu_div.h
+++ b/drivers/clk/sunxi-ng/ccu_div.h
@@ -300,5 +300,6 @@ static inline struct ccu_div *hw_to_ccu_div(struct clk_hw *hw)
 }
 
 extern const struct clk_ops ccu_div_ops;
+extern const struct clk_ops ccu_rodiv_ops;
 
 #endif /* _CCU_DIV_H_ */

-- 
2.47.3