Re: [PATCH 4/4] arm64: dts: socfpga: agilex5: add support for the ECC manager
From: Krzysztof Kozlowski
Date: Fri Jul 24 2026 - 05:48:07 EST
On Mon, Jul 20, 2026 at 03:14:25PM -0500, Dinh Nguyen wrote:
> Add the EDAC device to the base Agilex5 platform. Add OCRAM and Ethernet ECC
> device support to the Agilex5 platform.
>
> Signed-off-by: Dinh Nguyen <dinguyen@xxxxxxxxxx>
> ---
> .../arm64/boot/dts/intel/socfpga_agilex5.dtsi | 68 +++++++++++++++++++
> 1 file changed, 68 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi b/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi
> index b06c6d5d60eed..f30d476683b4a 100644
> --- a/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi
> +++ b/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi
> @@ -370,6 +370,74 @@ dmac1: dma-controller@10000 {
> };
> };
>
> + eccmgr {
Nope, this is just mis-represented. Non MMIO nodes DO NOT go to soc.
> + compatible = "altr,socfpga-agilex5-ecc-manager",
> + "altr,socfpga-a10-ecc-manager";
> + altr,sysmgr-syscon = <&sysmgr>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 95 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 120 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "global_sbe", "global_dbe", "io96b0" , "io96b1",
> + "sdm_qspi_sbe", "sdm_qspi_dbe", "sdm_seu";
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + ranges;
> +
> + ocram-ecc@108cc000 {
But this is MMIO node? This is just mess and wrong. If ecc mgr DOES NOT
have addressable range, then neither its children have.
Also for all nodes here:
Node names should be generic. See also an explanation and list of
examples (not exhaustive) in DT specification:
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation
If you cannot find a name matching your device, please check in kernel
sources for similar cases or you can grow the spec (via pull request to
DT spec repo).
Best regards,
Krzysztof