[PATCH v2 1/2] dt-bindings: media: i2c: Add Samsung S5KJN5 image sensor
From: Wenmeng Liu
Date: Fri Jul 24 2026 - 05:57:32 EST
Add device tree bindings for the Samsung S5KJN5, a 50 MP GBRG 10-bit RAW
MIPI CSI-2 image sensor controlled over CCI.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxxxxx>
Signed-off-by: Wenmeng Liu <wenmeng.liu@xxxxxxxxxxxxxxxx>
---
.../bindings/media/i2c/samsung,s5kjn5.yaml | 113 +++++++++++++++++++++
MAINTAINERS | 6 ++
2 files changed, 119 insertions(+)
diff --git a/Documentation/devicetree/bindings/media/i2c/samsung,s5kjn5.yaml b/Documentation/devicetree/bindings/media/i2c/samsung,s5kjn5.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..9526d2bc5f5be236d7e3d0f1409df2ef991dd0e7
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/samsung,s5kjn5.yaml
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/samsung,s5kjn5.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S5KJN5 Image Sensor
+
+description:
+ Samsung S5KJN5 is a 50MP GBRG 10-bit RAW MIPI CSI-2 image sensor.
+ The sensor is controlled over I2C. The full resolution pixel array is
+ 8192x6144, data output format is RAW10 transferred over 4-lane MIPI
+ D-PHY interface.
+
+maintainers:
+ - Wenmeng Liu <wenmeng.liu@xxxxxxxxxxxxxxxx>
+
+allOf:
+ - $ref: /schemas/media/video-interface-devices.yaml#
+
+properties:
+ compatible:
+ const: samsung,s5kjn5
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ description: MCLK/XVCLK input clock.
+ maxItems: 1
+
+ reset-gpios:
+ description: Active low GPIO connected to RESET pad of the sensor.
+ maxItems: 1
+
+ vddio-supply:
+ description:
+ 1.8 volt I/O voltage supply (VDD18). Required for both 1.8 and 1.2 volt
+ I/O operation.
+
+ vddd-supply:
+ description: Digital core voltage supply, 1.0 volts.
+
+ vdda-supply:
+ description: Analogue voltage supply, 2.2 volts.
+
+ vddio1p2-supply:
+ description:
+ 1.2 volt I/O voltage supply (VDDIO12). Required only for 1.2 volt I/O
+ operation.
+
+ afvdd-supply:
+ description: Autofocus actuator voltage supply, 2.8-3.0 volts.
+
+ port:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ additionalProperties: false
+
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ data-lanes:
+ items:
+ - const: 1
+ - const: 2
+ - const: 3
+ - const: 4
+
+ required:
+ - link-frequencies
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - port
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ camera@10 {
+ compatible = "samsung,s5kjn5";
+ reg = <0x10>;
+ clocks = <&camera_mclk 0>;
+ assigned-clocks = <&camera_mclk 0>;
+ assigned-clock-rates = <19200000>;
+ reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+ vddio-supply = <&vreg_1p8>;
+ vddd-supply = <&vreg_1p0>;
+ vdda-supply = <&vreg_2p2>;
+ vddio1p2-supply = <&vreg_1p2>;
+ afvdd-supply = <&vreg_2p8>;
+
+ port {
+ endpoint {
+ link-frequencies = /bits/ 64 <1248000000>;
+ data-lanes = <1 2 3 4>;
+ remote-endpoint = <&mipi_csi2_ep>;
+ };
+ };
+ };
+ };
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index 3af0fe95a92fc21c60819b892142380fad2ebd4e..244c7ed5872aa0972a7b055d7e0b19d530820a08 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -24190,6 +24190,12 @@ T: git git://linuxtv.org/media_tree.git
F: Documentation/devicetree/bindings/media/i2c/samsung,s5kjn1.yaml
F: drivers/media/i2c/s5kjn1.c
+SAMSUNG S5KJN5 CAMERA DRIVER
+M: Wenmeng Liu <wenmeng.liu@xxxxxxxxxxxxxxxx>
+L: linux-media@xxxxxxxxxxxxxxx
+S: Supported
+F: Documentation/devicetree/bindings/media/i2c/samsung,s5kjn5.yaml
+
SAMSUNG S5P Security SubSystem (SSS) DRIVER
M: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
M: Vladimir Zapolskiy <vz@xxxxxxxxx>
--
2.34.1