Re: [PATCH 6/8] arm64: dts: freescale: imx8mm-verdin: Add Toradex OV5640 CSI Cameras
From: Ernest Van Hoecke
Date: Fri Jul 24 2026 - 09:53:59 EST
On Thu, Jul 23, 2026 at 02:30:07PM -0500, Frank Li wrote:
> On Wed, Jul 22, 2026 at 06:15:50PM +0200, Ernest Van Hoecke wrote:
> > On Wed, Jul 22, 2026 at 09:43:37AM -0500, Frank Li wrote:
> > > On Wed, Jul 22, 2026 at 12:59:14PM +0200, Francesco Dolcini wrote:
> > > > Hello Kieran,
> > > >
> > > > On Wed, Jul 22, 2026 at 11:30:29AM +0100, Kieran Bingham wrote:
> > > > > Quoting Ernest Van Hoecke (2026-07-22 10:27:32)
> > > > > > On Mon, Jul 20, 2026 at 02:16:46PM -0400, Frank Li wrote:
> > > > > > > On Mon, Jul 13, 2026 at 05:06:27PM +0200, Ernest Van Hoecke wrote:
> > > > > > > > From: Ernest Van Hoecke <ernest.vanhoecke@xxxxxxxxxxx>
> > > > > > > >
> > > > > > > > Add device tree overlays for the Toradex OV5640 CSI Camera on Verdin CSI_1.
> > > > > > > >
> > > > > > > > The default overlay describes the current CSI Camera Set 5MP OV5640 with a
> > > > > > > > 27 MHz on-board oscillator. Add a separate 24 MHz overlay for the legacy
> > > > > > > > camera module.
> > > > > > > >
> > > > > > > > Link: https://developer.toradex.com/hardware/accessories/cameras/csi-camera-module-5mp-ov5640-arducam
> > > > > > > > Link: https://www.toradex.com/accessories/csi-camera-ov5640
> > > > > > > > Link: https://developer.toradex.com/hardware/legacy-products/other/csi-camera-module-5mp-ov5640/
> > > > > > > > Signed-off-by: Ernest Van Hoecke <ernest.vanhoecke@xxxxxxxxxxx>
> > > > > > > > ---
> > > > > > > > arch/arm64/boot/dts/freescale/Makefile | 6 ++
> > > > > > > > .../dts/freescale/imx8mm-verdin-ov5640-24mhz.dtso | 17 +++++
> > > > > > > > .../boot/dts/freescale/imx8mm-verdin-ov5640.dtsi | 78 ++++++++++++++++++++++
> > > > > > > > .../boot/dts/freescale/imx8mm-verdin-ov5640.dtso | 18 +++++
> > > > > > > > 4 files changed, 119 insertions(+)
> > > > ...
> > > > > I think with the Toradex ecosystem there would be some value in
> > > > > supporting or helping with the ongoing dt-connectors or dt-addons topics
> > > > > so that we can abstract the hardware which is being 'added'.
> > > > >
> > > > > I think it's important that we tackle the problem of combinatorial
> > > > > explosions of overlays when we can add a component to multiple
> > > > > platforms.
> > > > >
> > > > > For example, your OV5640 camera could be added to many different boards
> > > > > - and each board could have many different cameras - in different ports.
> > > > >
> > > > > We should not be copy/pasting overlays for each combination, or we'll
> > > > > have 'thousands' of identical overlays.
> > > >
> > > > I see your point, and I agree that it would be valuable to move this
> > > > topic forward. I will raise it internally at Toradex and see how we can
> > > > contribute.
> > > >
> > > > At the same time, quoting Marex (https://lore.kernel.org/all/dec2a7f6-80fd-4692-8936-969f8837a555@xxxxxxxxxxxx/):
> > > >
> > > > | DT connectors have been discussed for the last 10 or so years and three
> > > > | is still no real progress.
> > > > |
> > > > | I would be happy to send a follow up patchset which would convert the
> > > > | DTOs to whatever connector implementation format lands in the future,
> > > > | but I am concerned that waiting for DT connectors will block this
> > > > | patchset from landing for a long time.
> > > >
> > >
> > > I do quick check for ov5640, we can use partial connectors, which already
> > > in kernel tree.
> > >
> > > use duplicate label like
> > >
> > > in mainboard
> > > csi_io_i2c: &i2c3 {
> > > ...
> > > }
> > >
> > > csi_io_regualotor_3v3: ....
> > >
> > >
> > > csi_io: connector_csi {
> > > compatible = "...";
> > > gpio-map = <0 0 &gpio1 3 3>;
> > > ...
> > > irq-map =<0 &gpio1 4 1>;
> > > ...
> > > }
> > >
> > > in 5640 overlay
> > >
> > > &csi_io_i2c {
> > > camera@xx {
> > >
> > > reset-gpios = <&csi_io 0 ACTIVE_HIGHT>;
> > > }
> > > }
> > >
> > > https://lore.kernel.org/imx/AM9PR04MB8353AC7DF91C5F73C34019E0E3F72@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx/
> > >
> > > Only clock part have dependence. other parts. I am working mipi dsi for
> > > display, almost work except panel show have some problem, which is not
> > > related with connector.
> > >
> > > Frank
> >
> > This is very interesting and I agree with both you and Kieran that it
> > would be great to abstract these connections away and kill the need for
> > so many variations.
> >
> > Certainly I will read up on this and spread it internally as well.
> >
> > That said, since there are still unresolved dependencies, I am not
> > convinced that we should already head this way with this series. It
> > supports hardware that exists today in the currently standard and clean
> > way.
>
> Your ov5640 have not such dependence. You can try connector firstly.
>
> display most like can go through connector, (I remember pwm already
> supported, but not sure).
>
> others continue go through old method until dependence clear.
>
> Frank
>
The ov5640 still requires a clock nexus which is not merged yet.
I have been playing around with it locally now and find the work here
very interesting. Certainly this is also useful for Toradex and I would
like to use it to reduce duplication.
We will repeat this work for the Verdin iMX8MP. So I see real value in
using these new mechanisms to map the GPIOs such that the Verdin ov5640
overlay can be reused. However, this would also require a new binding
for a "verdin_csi" device.
Therefore, I could consider dropping the ov5640 overlays from this
series and sending them as a follow up with the partial connectors
support. But I don't want to block the series from getting merged for
this non-trivial effort.
If we go that way, I wonder where the verdin-ov5640 overlay should go?
We also have Verdin modules with a TI SoC, with the OV5640 overlays
already merged, that could be refactored. Those live in ti/, not
freescale/. Do you have any input on how we should deal with that?
Personally I am still more in favour of merging now and refactoring with
our next series for other SoMs, but I understand the desire to start on
this now so there are more consumers of this new behaviour.
Thanks for your input and kind regards,
Ernest