[PATCH v2 1/7] arm64: dts: freescale: imx8mm-verdin: Add NAU8822 Bridge Tied Load

[Ernest Van Hoecke]

From: Ernest Van Hoecke <ernest.vanhoecke@xxxxxxxxxxx>

Add a device tree overlay for configuring the NAU8822 loudspeaker
outputs as a Bridge Tied Load (BTL) output on the Verdin Development
Board.

The overlay adds the codec property for the BTL-capable output
configuration, where the two loudspeaker outputs are combined for higher
output power.

Signed-off-by: Ernest Van Hoecke <ernest.vanhoecke@xxxxxxxxxxx>
---
 arch/arm64/boot/dts/freescale/Makefile                     |  4 ++++
 .../boot/dts/freescale/imx8mm-verdin-dev-nau8822-btl.dtso  | 14 ++++++++++++++
 2 files changed, 18 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index d5c2dc720197..dcc0464b4e80 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -177,6 +177,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7901.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7902.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7903.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7904.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-dev-nau8822-btl.dtbo
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-dahlia.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-dev.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-ivy.dtb
@@ -184,12 +185,15 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-mallow.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-yavia.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-zinnia.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-wifi-dahlia.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-wifi-dev-nau8822-btl.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-wifi-dev.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-wifi-ivy.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-wifi-mallow.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-wifi-yavia.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-wifi-zinnia.dtb
 
+imx8mm-verdin-wifi-dev-nau8822-btl-dtbs := imx8mm-verdin-wifi-dev.dtb imx8mm-verdin-dev-nau8822-btl.dtbo
+
 imx8mm-tqma8mqml-mba8mx-lvds-g133han01-dtbs += imx8mm-tqma8mqml-mba8mx.dtb imx8mm-tqma8mqml-mba8mx-lvds-g133han01.dtbo
 imx8mm-tqma8mqml-mba8mx-lvds-tm070jvhg33-dtbs += imx8mm-tqma8mqml-mba8mx.dtb imx8mm-tqma8mqml-mba8mx-lvds-tm070jvhg33.dtbo
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-tqma8mqml-mba8mx-lvds-g133han01.dtb
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-dev-nau8822-btl.dtso b/arch/arm64/boot/dts/freescale/imx8mm-verdin-dev-nau8822-btl.dtso
new file mode 100644
index 000000000000..e4b662519a6b
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-dev-nau8822-btl.dtso
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) Toradex
+ *
+ * Enable Bridge Tied Load (BTL) speaker mode on the Verdin Development Board,
+ * combining the two loudspeaker outputs for higher output power.
+ */
+
+/dts-v1/;
+/plugin/;
+
+&nau8822_1a {
+	nuvoton,spk-btl;
+};

-- 
2.43.0