[PATCH v2] nfc: st95hf: switch to using sleeping variants of gpiod API

[Dmitry Torokhov]

The driver does not use gpiod API calls in an atomic context. Switch
to gpiod_set_value_cansleep() calls to allow using the driver with GPIO
controllers that might need process context to operate.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
---

v2: - dropped extra "not" from commit description (Przemek Kitszel)
    - link to v1: https://lore.kernel.org/r/9b77e25c-8942-42f7-b82e-42b492b437d8@xxxxxxxxx

FTR I am not using this driver but I'm helping clean up legacy gpio APIs
and stumbled on this. Using "cansleep" where we can is simply a good
practice.

 drivers/nfc/st95hf/core.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/nfc/st95hf/core.c b/drivers/nfc/st95hf/core.c
index 321fbe8aeca8..4d772a308bff 100644
--- a/drivers/nfc/st95hf/core.c
+++ b/drivers/nfc/st95hf/core.c
@@ -450,19 +450,19 @@ static int st95hf_select_protocol(struct st95hf_context *stcontext, int type)
 static void st95hf_send_st95enable_negativepulse(struct st95hf_context *st95con)
 {
 	/* First make irq_in pin high */
-	gpiod_set_value(st95con->enable_gpiod, HIGH);
+	gpiod_set_value_cansleep(st95con->enable_gpiod, HIGH);
 
 	/* wait for 1 milisecond */
 	usleep_range(1000, 2000);
 
 	/* Make irq_in pin low */
-	gpiod_set_value(st95con->enable_gpiod, LOW);
+	gpiod_set_value_cansleep(st95con->enable_gpiod, LOW);
 
 	/* wait for minimum interrupt pulse to make st95 active */
 	usleep_range(1000, 2000);
 
 	/* At end make it high */
-	gpiod_set_value(st95con->enable_gpiod, HIGH);
+	gpiod_set_value_cansleep(st95con->enable_gpiod, HIGH);
 }
 
 /*
-- 
2.55.0.229.g6434b31f56-goog


-- 
Dmitry