[PATCH net-next] dt-bindings: net: fix spelling errors
From: shaikh.kamal
Date: Sun Jul 26 2026 - 01:25:36 EST
Fix spelling errors reported by codespell:
encompases -> encompasses (stm32-dwmac, sti-dwmac, nxp,dwmac-imx)
curren -> current (motorcomm,yt8xxx)
No functional change.
Signed-off-by: shaikh.kamal <shaikhkamal2012@xxxxxxxxx>
---
Documentation/devicetree/bindings/net/motorcomm,yt8xxx.yaml | 4 ++--
Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml | 2 +-
Documentation/devicetree/bindings/net/sti-dwmac.txt | 2 +-
Documentation/devicetree/bindings/net/stm32-dwmac.yaml | 4 ++--
4 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/motorcomm,yt8xxx.yaml b/Documentation/devicetree/bindings/net/motorcomm,yt8xxx.yaml
index 26688e2302ea..e8108cde0f59 100644
--- a/Documentation/devicetree/bindings/net/motorcomm,yt8xxx.yaml
+++ b/Documentation/devicetree/bindings/net/motorcomm,yt8xxx.yaml
@@ -59,7 +59,7 @@ properties:
be configured with hardware pull-up resistors to match the SOC voltage
(usually 1.8V).
The software can read the registers to obtain the LDO voltage and configure
- the legal drive strength(curren).
+ the legal drive strength(current).
=====================================================
| voltage | current Available (uA) |
| 1.8v | 1200 2100 2700 2910 3110 3600 3970 4350 |
@@ -76,7 +76,7 @@ properties:
be configured with hardware pull-up resistors to match the SOC voltage
(usually 1.8V).
The software can read the registers to obtain the LDO voltage and configure
- the legal drive strength(curren).
+ the legal drive strength(current).
=====================================================
| voltage | current Available (uA) |
| 1.8v | 1200 2100 2700 2910 3110 3600 3970 4350 |
diff --git a/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml b/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml
index e5db346beca9..75c9820ee60b 100644
--- a/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml
+++ b/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml
@@ -72,7 +72,7 @@ properties:
- description: the offset of the GPR register
description:
Should be phandle/offset pair. The phandle to the syscon node which
- encompases the GPR register, and the offset of the GPR register.
+ encompasses the GPR register, and the offset of the GPR register.
nvmem-cells: true
diff --git a/Documentation/devicetree/bindings/net/sti-dwmac.txt b/Documentation/devicetree/bindings/net/sti-dwmac.txt
index e16287c06e5e..6e7e77da49bc 100644
--- a/Documentation/devicetree/bindings/net/sti-dwmac.txt
+++ b/Documentation/devicetree/bindings/net/sti-dwmac.txt
@@ -9,7 +9,7 @@ The device node has following properties.
Required properties:
- compatible : "st,stih407-dwmac"
- st,syscon : Should be phandle/offset pair. The phandle to the syscon node which
- encompases the glue register, and the offset of the control register.
+ encompasses the glue register, and the offset of the control register.
- st,gmac_en: this is to enable the gmac into a dedicated sysctl control
register available on STiH407 SoC.
- pinctrl-0: pin-control for all the MII mode supported.
diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
index 987254900d0d..fac882198a46 100644
--- a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
@@ -91,12 +91,12 @@ properties:
items:
- minItems: 2
items:
- - description: phandle to the syscon node which encompases the glue register
+ - description: phandle to the syscon node which encompasses the glue register
- description: offset of the control register
- description: field to set mask in register
description:
Should be phandle/offset pair. The phandle to the syscon node which
- encompases the glue register, the offset of the control register and
+ encompasses the glue register, the offset of the control register and
the mask to set bitfield in control register
st,ext-phyclk:
base-commit: 1590cf0329716306e948a8fc29f1d3ee87d3989f
--
2.43.0