[PATCH v5 1/6] dt-bindings: display: panel: Modify reset gpio number constrain

[Jun Nie]

Some panel support 2 reset gpio, such as Synaptics R63455. So modify the
number constrain of gpio to 1 to avoid check failure.

Signed-off-by: Jun Nie <jun.nie@xxxxxxxxxx>
---
 Documentation/devicetree/bindings/display/panel/panel-common.yaml | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/display/panel/panel-common.yaml b/Documentation/devicetree/bindings/display/panel/panel-common.yaml
index 087415753d606..7c450d2799808 100644
--- a/Documentation/devicetree/bindings/display/panel/panel-common.yaml
+++ b/Documentation/devicetree/bindings/display/panel/panel-common.yaml
@@ -119,7 +119,7 @@ properties:
       confused with a backlight enable signal.
 
   reset-gpios:
-    maxItems: 1
+    minItems: 1
     description:
       Specifier for a GPIO connected to the panel reset control signal.
       The reset signal is active low and resets the panel internal logic

-- 
2.43.0