Re: [PATCH v3 3/3] remoteproc: qcom: pas: Add Nord ADSP and CDSP support

[Shawn Guo]

On Mon, Jul 27, 2026 at 03:46:21PM +0800, Shawn Guo wrote:
> Add support for ADSP (HPASS DSP) and 4 CDSPs found on Nord SoC. The ADSP
> is pre-booted by XBL before Linux starts, so set early_boot flag for
> attach path rather than a cold boot sequence.
> 
> Signed-off-by: Shawn Guo <shengchao.guo@xxxxxxxxxxxxxxxx>
> ---
>  drivers/remoteproc/qcom_q6v5_pas.c | 110 +++++++++++++++++++++++++++++
>  1 file changed, 110 insertions(+)
> 
> diff --git a/drivers/remoteproc/qcom_q6v5_pas.c b/drivers/remoteproc/qcom_q6v5_pas.c
> index 25599d728208..6f3850a3fa9e 100644
> --- a/drivers/remoteproc/qcom_q6v5_pas.c
> +++ b/drivers/remoteproc/qcom_q6v5_pas.c
> @@ -1434,6 +1434,111 @@ static const struct qcom_pas_data milos_cdsp_resource = {
>  	.smem_host_id = 5,
>  };
>  
> +static const struct qcom_pas_data nord_adsp_resource = {
> +	.crash_reason_smem = 423,
> +	.firmware_name = "adsp.mdt",
> +	.dtb_firmware_name = "adsp_dtb.mbn",
> +	.pas_id = 1,
> +	.dtb_pas_id = 36,
> +	.minidump_id = 5,
> +	.auto_boot = true,
> +	.early_boot = true,
> +	.proxy_pd_names = (char*[]){
> +		"cx",
> +		"mx",
> +		NULL
> +	},
> +	.load_state = "adsp",
> +	.ssr_name = "lpass",
> +	.sysmon_name = "adsp",
> +	.ssctl_id = 0x14,
> +	.smem_host_id = 2,
> +};
> +
> +static const struct qcom_pas_data nord_cdsp0_resource = {
> +	.crash_reason_smem = 601,
> +	.firmware_name = "cdsp.mdt",
> +	.dtb_firmware_name = "cdsp_dtb.mbn",
> +	.pas_id = 18,
> +	.dtb_pas_id = 37,
> +	.minidump_id = 7,
> +	.auto_boot = true,
> +	.proxy_pd_names = (char*[]){
> +		"cx",
> +		"mx",
> +		"nsp",
> +		NULL
> +	},
> +	.load_state = "cdsp",
> +	.ssr_name = "cdsp0",
> +	.sysmon_name = "cdsp0",
> +	.ssctl_id = 0x17,
> +	.smem_host_id = 5,
> +};
> +
> +static const struct qcom_pas_data nord_cdsp1_resource = {
> +	.crash_reason_smem = 633,
> +	.firmware_name = "cdsp1.mdt",
> +	.dtb_firmware_name = "cdsp1_dtb.mbn",
> +	.pas_id = 30,
> +	.dtb_pas_id = 59,
> +	.minidump_id = 20,
> +	.auto_boot = true,
> +	.proxy_pd_names = (char*[]){
> +		"cx",
> +		"mx",
> +		"nsp",
> +		NULL
> +	},
> +	.load_state = "cdsp1",
> +	.ssr_name = "cdsp1",
> +	.sysmon_name = "cdsp1",
> +	.ssctl_id = 0x20,
> +	.smem_host_id = 69,
> +};
> +
> +static const struct qcom_pas_data nord_cdsp2_resource = {
> +	.crash_reason_smem = 665,
> +	.firmware_name = "cdsp2.mdt",
> +	.dtb_firmware_name = "cdsp2_dtb.mbn",
> +	.pas_id = 57,
> +	.dtb_pas_id = 60,
> +	.minidump_id = 29,
> +	.auto_boot = true,
> +	.proxy_pd_names = (char*[]){
> +		"cx",
> +		"mx",
> +		"nsp",
> +		NULL
> +	},
> +	.load_state = "cdsp2",
> +	.ssr_name = "cdsp2",
> +	.sysmon_name = "cdsp2",
> +	.ssctl_id = 0x1f,
> +	.smem_host_id = 133,
> +};
> +
> +static const struct qcom_pas_data nord_cdsp3_resource = {
> +	.crash_reason_smem = 666,
> +	.firmware_name = "cdsp3.mdt",
> +	.dtb_firmware_name = "cdsp3_dtb.mbn",
> +	.pas_id = 58,
> +	.dtb_pas_id = 61,
> +	.minidump_id = 30,
> +	.auto_boot = true,
> +	.proxy_pd_names = (char*[]){
> +		"cx",
> +		"mx",
> +		"nsp",
> +		NULL
> +	},
> +	.load_state = "cdsp3",
> +	.ssr_name = "cdsp3",
> +	.sysmon_name = "cdsp3",
> +	.ssctl_id = 0x1a,
> +	.smem_host_id = 197,
> +};
> +
>  static const struct qcom_pas_data sm8450_mpss_resource = {
>  	.crash_reason_smem = 421,
>  	.firmware_name = "modem.mdt",
> @@ -1695,6 +1800,11 @@ static const struct of_device_id qcom_pas_of_match[] = {
>  	{ .compatible = "qcom,milos-cdsp-pas", .data = &milos_cdsp_resource },
>  	{ .compatible = "qcom,milos-mpss-pas", .data = &sm8450_mpss_resource },
>  	{ .compatible = "qcom,milos-wpss-pas", .data = &sc7280_wpss_resource },
> +	{ .compatible = "qcom,nord-adsp-pas", .data = &nord_adsp_resource },
> +	{ .compatible = "qcom,nord-cdsp0-pas", .data = &nord_cdsp0_resource },
> +	{ .compatible = "qcom,nord-cdsp1-pas", .data = &nord_cdsp1_resource },
> +	{ .compatible = "qcom,nord-cdsp2-pas", .data = &nord_cdsp2_resource },
> +	{ .compatible = "qcom,nord-cdsp3-pas", .data = &nord_cdsp3_resource },

Oops! It breaks the alphabetic order. Will fix.

Shawn

>  	{ .compatible = "qcom,msm8226-adsp-pil", .data = &msm8996_adsp_resource },
>  	{ .compatible = "qcom,msm8953-adsp-pil", .data = &msm8996_adsp_resource },
>  	{ .compatible = "qcom,msm8974-adsp-pil", .data = &msm8996_adsp_resource },
> -- 
> 2.43.0
>