[PATCH] can: tcan4x5x: put tcan into sleep when removing driver

[Sean Nyekjaer]

Put the tcan4x5x transceiver into sleep mode when the driver is
removed, instead of leaving it in its current operating mode.
This reduces power consumption(3mA@12V) once the driver is
no longer bound to the device.

Note that the reset pin is needed to bring the device out of sleep
and back into standby mode again.

Signed-off-by: Sean Nyekjaer <sean@xxxxxxxxxx>
---
I havn't come across any drivers that leaves the devices in the lowest
power mode when unbinded. But we need this to enter our lowest power
mode in suspend.
If it doesn't fit in, I'm happy to carry this out of tree...

 drivers/net/can/m_can/tcan4x5x-core.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/can/m_can/tcan4x5x-core.c b/drivers/net/can/m_can/tcan4x5x-core.c
index 734b34b28291..b1b4db9990dc 100644
--- a/drivers/net/can/m_can/tcan4x5x-core.c
+++ b/drivers/net/can/m_can/tcan4x5x-core.c
@@ -565,6 +565,10 @@ static void tcan4x5x_can_remove(struct spi_device *spi)
 {
 	struct tcan4x5x_priv *priv = spi_get_drvdata(spi);
 
+	if (priv->reset_gpio)
+		regmap_update_bits(priv->regmap, TCAN4X5X_CONFIG,
+				   TCAN4X5X_MODE_SEL_MASK, TCAN4X5X_MODE_SLEEP);
+
 	m_can_class_unregister(&priv->cdev);
 
 	tcan4x5x_hc_free(priv);
-- 
2.52.0