Re: [PATCH v6 0/9] HID: steelseries: split out Arctis driver and add Nova 5X/Nova 7 support

[Bastien Nocera]

On Wed, 2026-07-08 at 23:23 -0400, Sriman Achanta wrote:
> From: Sriman Achanta <srimanachanta@xxxxxxxxx>
> 
> This series moves the SteelSeries Arctis headset support out of
> hid-steelseries.c into its own module, reworks it around a per-model
> device_info table, hardens the battery power-supply lifetime, adds an
> asynchronous status interface, and finally adds support for the
> Arctis
> Nova 5X and Nova 7 families. After the split, hid-steelseries.c is
> left
> handling only the SRW-S1 racing wheel.
> 
> Changes since v5:
>  - Nova: rename the Gen2-only parse function and device_info to
>    steelseries_arctis_nova_{parse_status,info} now that they are also
>    used by the Nova 5X and the 2026 refresh, not just Gen2.
>  - Nova: add device IDs and a device_info for the original (pre-Gen2)
>    Arctis Nova 7 family. It answers the same 0xb0/0xb7/0xb9/0xbb
> status
>    opcodes on the same interfaces as Gen2, but reports battery
> capacity
>    as a discrete 0-4 level rather than a raw percentage, so it gets
> its
>    own parse function that maps the level through
>    steelseries_map_capacity() instead of using it directly.
>  - Nova: add the Arctis Nova 5X, which shares the Gen2/2026 protocol.
>  - hid-ids.h: fix a whitespace-only bug where the new Nova 5X macro
> was
>    space-aligned instead of tab-aligned.
>  - Rebased on current master.
> 
> The Nova 5X protocol was verified against hardware by
> sp4m.an.joker@xxxxxxxxx, and the original Nova 7 protocol was
> verified
> against hardware by colin@xxxxxxxxx. Thanks to both for testing. I
> previously ommited other devices in the v4 patch series due to being
> unable to verify.

Tested locally, and reviewed all the patches, looks good to me, thanks
for the work Sriman!

Reviewed-by: Bastien Nocera <hadess@xxxxxxxxxx>

> 
> Sriman Achanta (9):
>   HID: steelseries: Fix ARCTIS_1_X device mislabeling
>   HID: steelseries: Split Arctis headset driver into separate module
>   HID: steelseries: Inline and simplify SRWS1 wheel driver
>   HID: steelseries: Refactor Arctis driver to use device_info
> framework
>   HID: steelseries: Report POWER_SUPPLY_STATUS_FULL when full
>   HID: steelseries: Correct Arctis 9 battery calibration range
>   HID: steelseries: Manage battery lifetime with refcounting
>   HID: steelseries: Add async status interface support
>   HID: steelseries: Add support for Arctis Nova 5X and Nova 7
> families
> 
>  drivers/hid/Makefile                 |   2 +-
>  drivers/hid/hid-ids.h                |  18 +-
>  drivers/hid/hid-quirks.c             |  16 +-
>  drivers/hid/hid-steelseries-arctis.c | 718
> +++++++++++++++++++++++++++
>  drivers/hid/hid-steelseries.c        | 406 +--------------
>  5 files changed, 759 insertions(+), 401 deletions(-)
>  create mode 100644 drivers/hid/hid-steelseries-arctis.c
> 
> 
> base-commit: 7404ce51637231382873d0b55edabc2f3b841a9d