[PATCH v6 8/9] arm64: dts: qcom: monaco: Enable CDSP cooling

[Gaurav Kohli]

Unlike the CPU, the CDSP does not throttle its speed automatically
when it reaches high temperatures in monaco.

Set up CDSP cooling for both instances by throttling the cdsp, when
it reaches 115°C.

Add polling-delay-passive so the governor periodically evaluates
the zone during passive cooling and steps up cooling levels when
temperature stabilizes below the next trip.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxxxxxxxx>
Signed-off-by: Gaurav Kohli <gaurav.kohli@xxxxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/monaco.dtsi | 99 ++++++++++++++++++++++++++++++++++++
 1 file changed, 99 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/monaco.dtsi b/arch/arm64/boot/dts/qcom/monaco.dtsi
index 64fc0d592282..3f388c000fbb 100644
--- a/arch/arm64/boot/dts/qcom/monaco.dtsi
+++ b/arch/arm64/boot/dts/qcom/monaco.dtsi
@@ -22,6 +22,7 @@
 #include <dt-bindings/soc/qcom,gpr.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
 #include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
+#include <dt-bindings/thermal/qcom,pas.h>
 #include <dt-bindings/thermal/thermal.h>
 
 / {
@@ -7738,6 +7739,8 @@ remoteproc_cdsp: remoteproc@26300000 {
 			qcom,smem-states = <&smp2p_cdsp_out 0>;
 			qcom,smem-state-names = "stop";
 
+			#cooling-cells = <3>;
+
 			status = "disabled";
 
 			glink-edge {
@@ -8170,39 +8173,87 @@ cpu-critical {
 		};
 
 		nsp-0-0-0-thermal {
+			polling-delay-passive = <200>;
+
 			thermal-sensors = <&tsens2 5>;
 
 			trips {
+				nsp_0_0_0_alert0: trip-point0 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
 				nsp-critical {
 					temperature = <125000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&nsp_0_0_0_alert0>;
+					cooling-device = <&remoteproc_cdsp QCOM_TMD_CDSP_SW
+							 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 		nsp-0-1-0-thermal {
+			polling-delay-passive = <200>;
+
 			thermal-sensors = <&tsens2 6>;
 
 			trips {
+				nsp_0_1_0_alert0: trip-point0 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
 				nsp-critical {
 					temperature = <125000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&nsp_0_1_0_alert0>;
+					cooling-device = <&remoteproc_cdsp QCOM_TMD_CDSP_SW
+							 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 		nsp-0-2-0-thermal {
+			polling-delay-passive = <200>;
+
 			thermal-sensors = <&tsens2 7>;
 
 			trips {
+				nsp_0_2_0_alert0: trip-point0 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
 				nsp-critical {
 					temperature = <125000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&nsp_0_2_0_alert0>;
+					cooling-device = <&remoteproc_cdsp QCOM_TMD_CDSP_SW
+							 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 		ddrss-0-thermal {
@@ -8290,39 +8341,87 @@ cpu-critical {
 		};
 
 		nsp-0-0-1-thermal {
+			polling-delay-passive = <200>;
+
 			thermal-sensors = <&tsens3 5>;
 
 			trips {
+				nsp_0_0_1_alert0: trip-point0 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
 				nsp-critical {
 					temperature = <125000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&nsp_0_0_1_alert0>;
+					cooling-device = <&remoteproc_cdsp QCOM_TMD_CDSP_SW
+							 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 		nsp-0-1-1-thermal {
+			polling-delay-passive = <200>;
+
 			thermal-sensors = <&tsens3 6>;
 
 			trips {
+				nsp_0_1_1_alert0: trip-point0 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
 				nsp-critical {
 					temperature = <125000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&nsp_0_1_1_alert0>;
+					cooling-device = <&remoteproc_cdsp QCOM_TMD_CDSP_SW
+							 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 		nsp-0-2-1-thermal {
+			polling-delay-passive = <200>;
+
 			thermal-sensors = <&tsens3 7>;
 
 			trips {
+				nsp_0_2_1_alert0: trip-point0 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
 				nsp-critical {
 					temperature = <125000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&nsp_0_2_1_alert0>;
+					cooling-device = <&remoteproc_cdsp QCOM_TMD_CDSP_SW
+							 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 		ddrss-1-thermal {

-- 
2.34.1