Re: [hwmon-next PATCH v3 1/4] dt-bindings: hwmon: adi,adt7470

[Krzysztof Kozlowski]

On 28/07/2026 10:14, Krzysztof Kozlowski wrote:
> On Tue, Jul 28, 2026 at 12:07:09AM -0300, Luiz Angelo Daros de Luca wrote:
>> The Analog Devices ADT7470 is a multichannel temperature sensor and
>> PWM fan controller. It supports monitoring up to 10 external
>> temperature sensors and controlling up to 4 fans.
>>
>> Add the device tree binding documentation for it. This includes
>> support for the thermal framework by defining the "#thermal-sensor-cells"
>> property, and models the fan control lines as PWM channels by
>> defining the "#pwm-cells" property.
>>
>> Signed-off-by: Luiz Angelo Daros de Luca <luizluca@xxxxxxxxx>
>> ---
>>  .../devicetree/bindings/hwmon/adi,adt7470.yaml     | 55 ++++++++++++++++++++++
>>  1 file changed, 55 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/hwmon/adi,adt7470.yaml b/Documentation/devicetree/bindings/hwmon/adi,adt7470.yaml
>> new file mode 100644
>> index 000000000000..bb2375a4a490
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/hwmon/adi,adt7470.yaml
>> @@ -0,0 +1,55 @@
>> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/hwmon/adi,adt7470.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Analog Devices ADT7470 hwmon sensor
>> +
>> +maintainers:
>> +  - Luiz Angelo Daros de Luca <luizluca@xxxxxxxxx>
>> +
>> +description:
>> +  Multi-channel temperature monitor and PWM fan controller.
>> +  It supports monitoring up to 10 external temperature sensors and
>> +  controlling up to four fans. The fan control lines are modeled
>> +  as standard PWM channels.
>> +
>> +properties:
>> +  compatible:
>> +    const: adi,adt7470
>> +
>> +  reg:
>> +    maxItems: 1
>> +
>> +  "#pwm-cells":
>> +    const: 3
>> +    description:
>> +      See Documentation/devicetree/bindings/pwm/pwm.yaml for the
>> +      generic PWM binding description.
> 
> Drop description.
> 
> You OTOH, miss ref to pwm schema. Referencing here in description should
> raise you questions... And then use unevaluatedProperties.
> 

You most likely miss ref to thermal-sensor.yaml as well, but that would
change the ABI since hwmon would fail on missing cells, right?

Best regards,
Krzysztof