Re: [PATCH 4/6] PCI/pwrctrl: tc9563: Skip Tx amplitude and DFE tuning for DSP3
From: Alex Elder
Date: Tue Jul 28 2026 - 09:35:29 EST
On 7/28/26 8:25 AM, Manivannan Sadhasivam wrote:
On Mon, Jul 27, 2026 at 10:59:11AM -0500, Alex Elder wrote:
On 7/25/26 3:59 AM, Manivannan Sadhasivam via B4 Relay wrote:
From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxxxxxxxx>
DSP3 doesn't support tuning Tx amplitude and DFE settings. So just skip
the setting if DT has passed the tuning properties. There is no need to
error out the whole driver because of it.
Fixes: 4c9c7be47310 ("PCI: pwrctrl: Add power control driver for TC9563")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxxxxxxxx>
So to keep things simple, tc9563_pwrctrl_parse_device_dt() is called
for all downstream ports but you ignore the setting (with a warning)
for those that do not apply to DSP3.
What about tc9563_pwrctrl_set_nfts()?
Good catch! I missed adding the check for N_FTS as well:
In case you need it:
Reviewed-by: Alex Elder <elder@xxxxxxxxxxxx>
```
diff --git a/drivers/pci/pwrctrl/pci-pwrctrl-tc9563.c b/drivers/pci/pwrctrl/pci-pwrctrl-tc9563.c
index 9d869483b6b3..978907aa0ce5 100644
--- a/drivers/pci/pwrctrl/pci-pwrctrl-tc9563.c
+++ b/drivers/pci/pwrctrl/pci-pwrctrl-tc9563.c
@@ -410,11 +410,17 @@ static int tc9563_pwrctrl_set_nfts(struct tc9563_pwrctrl *tc9563,
{TC9563_NFTS_2_5_GT, nfts[0]},
{TC9563_NFTS_5_GT, nfts[1]},
};
+ struct device *dev = tc9563->pwrctrl.dev;
int ret;
if (!nfts[0])
return 0;
+ if (port == TC9563_VDSP) {
+ dev_dbg(dev, "N_FTS tuning not supported for VDSP\n");
+ return 0;
+ }
+
ret = tc9563_pwrctrl_i2c_write(tc9563->client, TC9563_PORT_SELECT,
BIT(port));
if (ret)
```
@Bjorn: Could you please amend the above diff with this commit?
- Mani