[PATCH 1/2] arm64: dts: ti: k3-am67a-beagley-ai: Add gpio ranges

[David Lechner (TI)]

Add pinctrl-single,gpio-range properties to the BeagleY-AI .dts so that
GPIOs get the correct pin mux when requested.

Signed-off-by: David Lechner (TI) <dlechner@xxxxxxxxxxxx>
---
 arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts b/arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts
index 5255e04b9ac7..599d576f694f 100644
--- a/arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts
+++ b/arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts
@@ -149,6 +149,19 @@ led-1 {
 };
 
 &main_pmx0 {
+	pinctrl-single,gpio-range =
+		<&main_pmx0_range 0 32 PIN_GPIO_RANGE_IOPAD>,
+		<&main_pmx0_range 33 38 PIN_GPIO_RANGE_IOPAD>,
+		<&main_pmx0_range 72 17 PIN_GPIO_RANGE_IOPAD>,
+		<&main_pmx0_range 101 25 PIN_GPIO_RANGE_IOPAD>,
+		<&main_pmx0_range 137 5 PIN_GPIO_RANGE_IOPAD>,
+		<&main_pmx0_range 143 3 PIN_GPIO_RANGE_IOPAD>,
+		<&main_pmx0_range 149 2 PIN_GPIO_RANGE_IOPAD>;
+
+	main_pmx0_range: gpio-range {
+		#pinctrl-single,gpio-range-cells = <3>;
+	};
+
 	main_i2c0_pins_default: main-i2c0-default-pins {
 		pinctrl-single,pins = <
 			J722S_IOPAD(0x01e0, PIN_INPUT_PULLUP, 0) /* (D23) I2C0_SCL */
@@ -267,6 +280,15 @@ &main_uart0 {
 };
 
 &mcu_pmx0 {
+	pinctrl-single,gpio-range =
+		<&mcu_pmx_range 0 21 PIN_GPIO_RANGE_IOPAD>,
+		<&mcu_pmx_range 23 1 PIN_GPIO_RANGE_IOPAD>,
+		<&mcu_pmx_range 32 2 PIN_GPIO_RANGE_IOPAD>;
+
+	mcu_pmx_range: gpio-range {
+		#pinctrl-single,gpio-range-cells = <3>;
+	};
+
 	wkup_uart0_pins_default: wkup-uart0-default-pins {
 		pinctrl-single,pins = <
 			J722S_MCU_IOPAD(0x02c, PIN_INPUT, 0)	/* (C7) WKUP_UART0_CTSn */

-- 
2.43.0