Re: [PATCH 2/2] riscv: dts: spacemit: Make dtschema recognize the etherent PHY correctly on K3 com260 board

[Yixun Lan]

On 09:24 Wed 29 Jul     , Inochi Amaoto wrote:
> Since the previous commit does not change the phy node name,
> the dtschema can not recognize the type of the ethernet phy,
> so the following error is produced:
> 
> /arch/riscv/boot/dts/spacemit/k3-com260-ifx.dtb: phy@1 (ethernet-phy-id001c.c916): $nodename:0: 'phy@1' does not match '^ethernet-phy(@[a-f0-9]+)?$'
>         from schema $id: http://devicetree.org/schemas/net/realtek,rtl82xx.yaml
> /arch/riscv/boot/dts/spacemit/k3-com260-ifx.dtb: phy@1 (ethernet-phy-id001c.c916): Unevaluated properties are not allowed ('reg', 'reset-assert-us', '
> reset-deassert-us', 'reset-gpios' were unexpected)
>         from schema $id: http://devicetree.org/schemas/net/realtek,rtl82xx.yaml
> 
> Change the nodename to make the dtschema can recognize the right
> PHY type.
> 
> Fixes: 9db839d52ccd ("riscv: dts: spacemit: Fix phy id check for the phy on com260 board")
> Signed-off-by: Inochi Amaoto <inochiama@xxxxxxxxx>
Also, with my R-B
Reviewed-by: Yixun Lan <dlan@xxxxxxxxxx>

-- 
Yixun Lan (dlan)