Re: [PATCH v7 4/6] arm64: dts: qcom: glymur-crd: Add PHY supplies for pcie3_phy

From: Konrad Dybcio

Date: Wed Jul 29 2026 - 05:30:53 EST


On 7/29/26 11:11 AM, Qiang Yu wrote:
> On Wed, Jul 29, 2026 at 10:30:27AM +0200, Konrad Dybcio wrote:
>> On 7/29/26 8:45 AM, Qiang Yu wrote:
>>> On Mon, Jul 27, 2026 at 04:47:15PM +0200, Konrad Dybcio wrote:
>>>> On 7/24/26 12:01 PM, Qiang Yu wrote:
>>>>> CRD wires the shared Gen5x8 PCIe PHY's regulator supplies through
>>>>> board-specific PMIC rails. Add the vdda-phy, vdda-pll, and
>>>>> vdda-refgen0p9/1p2 supplies for &pcie3_phy.
>>>>>
>>>>> Signed-off-by: Qiang Yu <qiang.yu@xxxxxxxxxxxxxxxx>
>>>>> ---
>>>>> arch/arm64/boot/dts/qcom/glymur-crd.dts | 8 ++++++++
>>>>> 1 file changed, 8 insertions(+)
>>>>>
>>>>> diff --git a/arch/arm64/boot/dts/qcom/glymur-crd.dts b/arch/arm64/boot/dts/qcom/glymur-crd.dts
>>>>> index 6125617de82a..0aae613a33ad 100644
>>>>> --- a/arch/arm64/boot/dts/qcom/glymur-crd.dts
>>>>> +++ b/arch/arm64/boot/dts/qcom/glymur-crd.dts
>>>>> @@ -28,3 +28,11 @@ &mdss_dp1 {
>>>>> &mdss_dp1_out {
>>>>> link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
>>>>> };
>>>>> +
>>>>> +&pcie3_phy {
>>>>> + vdda-phy-supply = <&vreg_l3c_e1_0p89>;
>>>>> + vdda-pll-supply = <&vreg_l2c_e1_1p14>;
>>>>> +
>>>>> + vdda-refgen0p9-supply = <&vreg_l1c_e1_0p82>;
>>>>> + vdda-refgen1p2-supply = <&vreg_l4f_e1_1p08>;
>>>>
>>>> I'm guessing you also meant to enable it here
>>>
>>> No, we need to keep it as disabled because pcie3b is not enabled by
>>> default on glymur crd.
>>>
>>> See the fake pcie3b_phy be dropped, it is disabled
>>> https://lore.kernel.org/all/20260420133616.88740-2-krzysztof.kozlowski@xxxxxxxxxxxxxxxx/
>>
>> I think there are SKUs with dual-NVMe that use it
>
> But the pcie3b controller node is also disabled, should I enable it in
> this series?

Do we know what happens if UEFI sets this to x8-mode? (is that even
a concern on CRDs specifically though?) Will the second controller fail
to probe and become a sync_state hog?

Konrad