Re: [PATCH v2 6/6] arm64: dts: qcom: rb3gen2: add Industrial BT UART overlay

[Konrad Dybcio]

On 7/27/26 5:45 PM, Rahul Samana wrote:
> The reworked RB3 Gen 2 Industrial mezzanine keeps the common Industrial
> mezzanine hardware description but routes QCC2072 Bluetooth over UART4
> instead of the default Bluetooth-over-USB path.
> 
> Build this variant by applying the common Industrial mezzanine overlay
> first, followed by the BT UART overlay. The overlay models the M.2 E-key
> connector graph endpoints for PCIe and UART, and disables the on-board
> WCN6750 PMU and UART7 path so the M.2 QCC2072 Bluetooth controller can be
> used instead.

So is the onboard module disabled? Can we not just use two in parallel?

[...]

> +&pcie0_m2_e {
> +	port {
> +		pcie0_m2_e_ep: endpoint {
> +			remote-endpoint = <&m2_e_pcie_ep>;
> +		};
> +	};
> +};
> +
> +&uart4 {
> +	interrupts-extended = <&intc GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>,
> +			      <&tlmm 19 IRQ_TYPE_EDGE_FALLING>;
> +	pinctrl-names = "default", "sleep";
> +	pinctrl-1 = <&qup_uart4_sleep_cts>, <&qup_uart4_sleep_rts>,
> +		    <&qup_uart4_sleep_tx>, <&qup_uart4_sleep_rx>;
> +
> +	status = "okay";
> +
> +	port {
> +		uart4_m2_e_ep: endpoint {
> +			remote-endpoint = <&m2_e_uart_ep>;
> +		};
> +	};

Let's define both PCIe and UART endpoint sin the SoC DTSI. And don't
mention "m2" in their labels.

Just pcie0_port0_ep and uart4_ep respectively.

Konrad