[PATCH 0/8] MMC pinmux configuration fixes

[Judith Mendez]

This series fixes MMC pin input/output and pullup/pulldown settings
across AM62x, AM62AX, AM62LX and AM64x boards.

All patches have been tested except patch 5/8, so tested-bys
are apreciated.

Judith Mendez (8):
  arm64: dts: ti: k3-am62a: Fix MMC0_CLK register address
  arm64: dts: ti: k3-am62a: Set MMC clock pins as OUTPUT
  arm64: dts: ti: k3-am62: Set MMC clock pins as OUTPUT
  arm64: dts: ti: k3-am62l-evm: Remove unnecessary internal pullups for
    MMC0
  arm64: dts: ti: k3-am64: Enable IO expander interrupt
  arm64: dts: ti: k3-am64: Let MMC1 clock loopback use hardware default
  arm64: dts: ti: k3-am64-sk: Disable MMC1 internal pulls
  arm64: dts: ti: k3-am642-evm: Remove unnecessary internal pullups for
    MMC1

 arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts      |  2 +-
 .../boot/dts/ti/k3-am62-pocketbeagle2.dts     |  2 +-
 .../arm64/boot/dts/ti/k3-am625-beagleplay.dts |  6 ++--
 .../arm64/boot/dts/ti/k3-am625-sk-common.dtsi |  2 +-
 arch/arm64/boot/dts/ti/k3-am62a7-sk.dts       |  5 ++--
 arch/arm64/boot/dts/ti/k3-am62l3-evm.dts      |  4 +--
 .../arm64/boot/dts/ti/k3-am62x-sk-common.dtsi |  2 +-
 arch/arm64/boot/dts/ti/k3-am642-evm.dts       | 19 +++++++++---
 arch/arm64/boot/dts/ti/k3-am642-sk.dts        | 29 +++++++++++++------
 9 files changed, 46 insertions(+), 25 deletions(-)

-- 
2.54.0