Re: [PATCH v2 1/4] spi: dt-bindings: amlogic: spisg: Document A9-specific properties

[Mark Brown]

On Thu, Jul 23, 2026 at 06:43:42AM +0000, Xianwei Zhao via B4 Relay wrote:
> From: Xianwei Zhao <xianwei.zhao@xxxxxxxxxxx>

> Document the Amlogic A9 SPISG controller and its additional
> Device Tree properties.

> Add the "amlogic,a9-spisg" compatible string and define the
> A9-specific "amlogic,mo-idle-output" and "amlogic,word-gap"
> properties, which configure the MOSI idle output level and
> the inter-word gap, respectively.

> @@ -35,6 +34,23 @@ properties:
>    resets:
>      maxItems: 1
>  
> +  amlogic,mo-idle-output:
> +    description: |
> +      Controls the MOSI output level when the controller is idle.
> +      0 - Drive MOSI low
> +      1 - Drive MOSI high
> +      2 - Follow the last transmitted bit
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    enum: [0, 1, 2]
> +    default: 0
> +
> +  amlogic,word-gap:
> +    description: |
> +      Number of idle clock cycles inserted between consecutive SPI words.
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    enum: [0, 1, 2, 3]
> +    default: 1

I'd expect these to be per-device properties, not per controller.  The
word_gap sounds a lot like the existing word_delay feature we have - if
it's different it'd be good to be clear why.

Attachment: signature.asc
Description: PGP signature