Re: [PATCH v11 06/11] clk: realtek: Add support for gate clock

[Brian Masney]

Hi Yu-Chun,

On Tue, Jul 28, 2026 at 10:28:01PM +0800, Yu-Chun Lin wrote:
> From: Cheng-Yu Lee <cylee12@xxxxxxxxxxx>
> 
> Introduce clk_regmap_gate_ops supporting enable, disable, is_enabled, and
> for standard regmap gate clocks.
> 
> Add clk_regmap_gate_ro_ops as a read-only variant exposing only is_enabled.
> 
> Signed-off-by: Cheng-Yu Lee <cylee12@xxxxxxxxxxx>
> Co-developed-by: Yu-Chun Lin <eleanor.lin@xxxxxxxxxxx>
> Signed-off-by: Yu-Chun Lin <eleanor.lin@xxxxxxxxxxx>
> ---
> Changes in v11:
> - Add 'rtk_' prefix into struct names and function names.
> ---
>  drivers/clk/realtek/Makefile          |  1 +
>  drivers/clk/realtek/clk-regmap-gate.c | 70 +++++++++++++++++++++++++++
>  drivers/clk/realtek/clk-regmap-gate.h | 65 +++++++++++++++++++++++++
>  3 files changed, 136 insertions(+)
>  create mode 100644 drivers/clk/realtek/clk-regmap-gate.c
>  create mode 100644 drivers/clk/realtek/clk-regmap-gate.h
> 
> diff --git a/drivers/clk/realtek/Makefile b/drivers/clk/realtek/Makefile
> index 71edc18121c6..90c0658a83bf 100644
> --- a/drivers/clk/realtek/Makefile
> +++ b/drivers/clk/realtek/Makefile
> @@ -4,3 +4,4 @@ obj-$(CONFIG_RTK_CLK_COMMON) += clk-rtk.o
>  clk-rtk-y += clk-rtk-common.o
>  clk-rtk-y += clk-pll.o
>  clk-rtk-y += freq_table.o
> +clk-rtk-y += clk-regmap-gate.o

Sort the list.

With that fixed:

Reviewed-by: Brian Masney <bmasney@xxxxxxxxxx>