[PATCH v2 3/3] serial: amba-pl011: synchronize DMA teardown

[Fan Wu]

dmaengine_terminate_all() does not wait for a running callback, so the TX
callback can still touch the TX buffer after it is freed. The RX poll
timer reads the RX buffers without the port lock.

Switch to dmaengine_terminate_sync() and delete the RX timer before
freeing the buffers.

Fixes: ead76f329f77 ("ARM: 6763/1: pl011: add optional RX DMA to PL011 v2")
Cc: stable@xxxxxxxxxxxxxxx
Assisted-by: Codex:gpt-5.6
Signed-off-by: Fan Wu <fanwu01@xxxxxxxxxx>
---
 drivers/tty/serial/amba-pl011.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index e686835d5150..9bfccb021383 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -1182,7 +1182,7 @@ static void pl011_dma_shutdown(struct uart_amba_port *uap)
 
 	if (uap->using_tx_dma) {
 		/* In theory, this should already be done by pl011_dma_flush_buffer */
-		dmaengine_terminate_all(uap->dmatx.chan);
+		dmaengine_terminate_sync(uap->dmatx.chan);
 		if (uap->dmatx.queued) {
 			dma_unmap_single(uap->dmatx.chan->device->dev,
 					 uap->dmatx.dma, uap->dmatx.len,
@@ -1195,12 +1195,12 @@ static void pl011_dma_shutdown(struct uart_amba_port *uap)
 	}
 
 	if (uap->using_rx_dma) {
-		dmaengine_terminate_all(uap->dmarx.chan);
+		if (uap->dmarx.poll_rate)
+			timer_delete_sync(&uap->dmarx.timer);
+		dmaengine_terminate_sync(uap->dmarx.chan);
 		/* Clean up the RX DMA */
 		pl011_dmabuf_free(uap->dmarx.chan, &uap->dmarx.dbuf_a, DMA_FROM_DEVICE);
 		pl011_dmabuf_free(uap->dmarx.chan, &uap->dmarx.dbuf_b, DMA_FROM_DEVICE);
-		if (uap->dmarx.poll_rate)
-			timer_delete_sync(&uap->dmarx.timer);
 		uap->using_rx_dma = false;
 	}
 }
-- 
2.34.1