Re: [PATCH 0/8] MMC pinmux configuration fixes

[Vignesh Raghavendra]

Hi Judith

On 30/07/26 01:29, Judith Mendez wrote:
> This series fixes MMC pin input/output and pullup/pulldown settings
> across AM62x, AM62AX, AM62LX and AM64x boards.
> 
> All patches have been tested except patch 5/8, so tested-bys
> are apreciated.
> 
> Judith Mendez (8):
>   arm64: dts: ti: k3-am62a: Fix MMC0_CLK register address
>   arm64: dts: ti: k3-am62a: Set MMC clock pins as OUTPUT
>   arm64: dts: ti: k3-am62: Set MMC clock pins as OUTPUT
>   arm64: dts: ti: k3-am62l-evm: Remove unnecessary internal pullups for
>     MMC0
>   arm64: dts: ti: k3-am64: Enable IO expander interrupt
>   arm64: dts: ti: k3-am64: Let MMC1 clock loopback use hardware default
>   arm64: dts: ti: k3-am64-sk: Disable MMC1 internal pulls
>   arm64: dts: ti: k3-am642-evm: Remove unnecessary internal pullups for
>     MMC1
> 

Apart from 5/8, these patches seems like bug fixes. Please repost them
with appropriate Fixes tag. Its better to separate out 5/8 as standalone
patch.

>  arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts      |  2 +-
>  .../boot/dts/ti/k3-am62-pocketbeagle2.dts     |  2 +-
>  .../arm64/boot/dts/ti/k3-am625-beagleplay.dts |  6 ++--
>  .../arm64/boot/dts/ti/k3-am625-sk-common.dtsi |  2 +-
>  arch/arm64/boot/dts/ti/k3-am62a7-sk.dts       |  5 ++--
>  arch/arm64/boot/dts/ti/k3-am62l3-evm.dts      |  4 +--
>  .../arm64/boot/dts/ti/k3-am62x-sk-common.dtsi |  2 +-
>  arch/arm64/boot/dts/ti/k3-am642-evm.dts       | 19 +++++++++---
>  arch/arm64/boot/dts/ti/k3-am642-sk.dts        | 29 +++++++++++++------
>  9 files changed, 46 insertions(+), 25 deletions(-)
> 

-- 
Regards
Vignesh
https://ti.com/opensource