Re: [PATCH 1/4] dt-bindings: media: i2c: Add Sony IMX471 CMOS Image Sensor

From: Sakari Ailus

Date: Thu Aug 06 2026 - 06:33:55 EST


Hi Danila,

Thanks for the set.

On Wed, Aug 05, 2026 at 10:54:24PM +0300, Danila Tikhonov wrote:
> Document the Sony IMX471 CMOS Image Sensor.
>
> Signed-off-by: Danila Tikhonov <danila@xxxxxxxxxxxxxx>
> ---
> .../devicetree/bindings/media/i2c/sony,imx471.yaml | 123 +++++++++++++++++++++
> 1 file changed, 123 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx471.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx471.yaml
> new file mode 100644
> index 000000000000..9c6c7c55746f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/i2c/sony,imx471.yaml
> @@ -0,0 +1,123 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/i2c/sony,imx471.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Sony IMX471 CMOS Image Sensor
> +
> +maintainers:
> + - Danila Tikhonov <danila@xxxxxxxxxxxxxx>
> +
> +description: |-

I believe you can drop ' |-'.

> + The Sony IMX471 is a diagonal 5.822 mm (Type 1/3.09) 16-megapixel
> + back-illuminated stacked CMOS active pixel image sensor with a 4656 x 3496
> + active pixel array and 1.0 um square pixels. It uses a Quad Bayer color filter
> + array, is programmable through an I2C interface, and outputs image data
> + through MIPI CSI-2.
> +
> +allOf:
> + - $ref: /schemas/media/video-interface-devices.yaml#
> +
> +properties:
> + compatible:
> + const: sony,imx471
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + description: External input clock (19.2 MHz)
> + maxItems: 1
> +
> + vana-supply:
> + description: Analog power supply (2.8 V)
> +
> + vdig-supply:
> + description: Digital core power supply (1.05 V)
> +
> + vif-supply:
> + description: I/O interface power supply (1.8 V)
> +
> + reset-gpios:
> + description: Sensor reset (XCLR) GPIO
> + maxItems: 1
> +
> + port:
> + $ref: /schemas/graph.yaml#/$defs/port-base
> + unevaluatedProperties: false
> +
> + properties:
> + endpoint:
> + $ref: /schemas/media/video-interfaces.yaml#
> + unevaluatedProperties: false
> +
> + properties:
> + data-lanes:
> + items:
> + - const: 1
> + - const: 2
> + - const: 3
> + - const: 4

The sensor also supports two-lane operation.

> +
> + link-frequencies:
> + maxItems: 1
> + items:
> + const: 200000000

The sensor isn't limited to 200 MHz, is it? I just wouldn't specify it at
all.

> +
> + required:
> + - data-lanes
> + - link-frequencies
> +
> + required:
> + - endpoint
> +
> +required:
> + - compatible
> + - reg
> + - clocks
> + - vana-supply
> + - vdig-supply
> + - vif-supply
> + - port
> +
> +unevaluatedProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/qcom,camcc-sc7280.h>
> + #include <dt-bindings/gpio/gpio.h>
> +
> + i2c {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + camf_imx471: camera@1a {
> + compatible = "sony,imx471";
> + reg = <0x1a>;
> +
> + vana-supply = <&vreg_camf_vana_2p8>;
> + vdig-supply = <&vreg_camf_vdig_1p1>;
> + vif-supply = <&vreg_cam_vio_1p8>;
> +
> + clocks = <&camcc CAM_CC_MCLK0_CLK>;
> + assigned-clocks = <&camcc CAM_CC_MCLK0_CLK>;
> + assigned-clock-rates = <19200000>;
> +
> + reset-gpios = <&tlmm 20 GPIO_ACTIVE_LOW>;
> + pinctrl-0 = <&cam_mclk0_default>;
> + pinctrl-names = "default";
> +
> + orientation = <0>;
> + rotation = <270>;
> +
> + port {
> + camera_imx471_ep: endpoint {
> + data-lanes = <1 2 3 4>;
> + link-frequencies = /bits/ 64 <200000000>;
> + remote-endpoint = <&csiphy0_ep>;
> + };
> + };
> + };
> + };
> +...
>

--
Regards,

Sakari Ailus