[PATCH v2 06/12] clk: qcom: ipq-cmn-pll: Add PPE clock support

[Luo Jie]

The PPE (packet process engine) clock is derived from the CMN PLL
output divided by 2 and then further divided by a configurable 6-bit
divider. It shares the CMN_PLL_NSS_PPE_FREQ_CTRL register with the
NSS clock but uses a different field (bits [5:0]).

Register the PPE clock through the ipq_cmn_pll_regmap_div_register()
helper introduced for the NSS clock, passing the PPE-specific field
mask.

Signed-off-by: Luo Jie <jie.luo@xxxxxxxxxxxxxxxx>
---
 drivers/clk/qcom/ipq-cmn-pll.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/clk/qcom/ipq-cmn-pll.c b/drivers/clk/qcom/ipq-cmn-pll.c
index c1b00699eb72..a24e57b33c6b 100644
--- a/drivers/clk/qcom/ipq-cmn-pll.c
+++ b/drivers/clk/qcom/ipq-cmn-pll.c
@@ -71,6 +71,7 @@
 
 #define CMN_PLL_NSS_PPE_FREQ_CTRL		0x98
 #define CMN_PLL_NSS_CLK_SEL			GENMASK(13, 8)
+#define CMN_PLL_PPE_CLK_SEL			GENMASK(5, 0)
 
 #define CMN_PLL_POWER_ON_AND_RESET		0x780
 #define CMN_ANA_EN_SW_RSTN			BIT(6)
@@ -90,10 +91,12 @@
  * enum cmn_pll_clk_type - CMN PLL output clock registration type
  * @CMN_PLL_CLK_FIXED_RATE: plain fixed rate clock
  * @CMN_PLL_CLK_NSS: NSS clock with configurable divider
+ * @CMN_PLL_CLK_PPE: PPE clock with configurable divider
  */
 enum cmn_pll_clk_type {
 	CMN_PLL_CLK_FIXED_RATE,
 	CMN_PLL_CLK_NSS,
+	CMN_PLL_CLK_PPE,
 };
 
 /**
@@ -464,6 +467,12 @@ static int ipq_cmn_pll_register_clks(struct platform_device *pdev)
 							     fixed_clk[i].name,
 							     CMN_PLL_NSS_CLK_SEL);
 			break;
+		case CMN_PLL_CLK_PPE:
+			hw = ipq_cmn_pll_regmap_div_register(pdev, cmn_pll->regmap,
+							     cmn_pll_hw,
+							     fixed_clk[i].name,
+							     CMN_PLL_PPE_CLK_SEL);
+			break;
 		}
 
 		if (IS_ERR(hw))

-- 
2.43.0