[PATCH v2] media: ipu-bridge: Add OV01A1B sensor config

[Steve Kaznak]

Add the Omnivision OV01A1B (ACPI HID OVTI01AB) to the
ipu_supported_sensors[] table, with the same single 400 MHz link
frequency as the OV01A10 and OV01A1S entries it shares a comment with.

The sensor is the IR camera in the Dell XPS 13 Plus 9320, behind an
Intel Vision Sensing Controller (IVSC). Commit 36eab90d3f4f ("media:
i2c: ov01a10: Add ov01a1b support") added driver support for it, but
without a bridge entry no fwnode graph endpoint is created, so the
driver never binds and the camera is not enumerated.

Tested on an XPS 13 Plus 9320: the sensor binds and streams 1296x816
Y10 at 30 fps.

Signed-off-by: Steve Kaznak <skaznak@xxxxxxxxxxxxxx>
Reviewed-by: Mehdi Djait <mehdi.djait@xxxxxxxxxxxxxxx>
---
Changes in v2:
- Move OVTI01AB before OVTI01AS so the table stays sorted by ACPI HID,
  and reorder the shared comment to match (Mehdi Djait)
- Add Reviewed-by from v1

v1: https://lore.kernel.org/linux-media/20260805021154.51404-1-skaznak@xxxxxxxxxxxxxx/

 drivers/media/pci/intel/ipu-bridge.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/media/pci/intel/ipu-bridge.c b/drivers/media/pci/intel/ipu-bridge.c
index 88581a4c081d..3dde07443002 100644
--- a/drivers/media/pci/intel/ipu-bridge.c
+++ b/drivers/media/pci/intel/ipu-bridge.c
@@ -73,8 +73,9 @@ static const struct ipu_sensor_config ipu_supported_sensors[] = {
 	IPU_SENSOR_CONFIG("INT3537", 1, 437000000),
 	/* Lontium lt6911uxe */
 	IPU_SENSOR_CONFIG("INTC10C5", 0),
-	/* Omnivision OV01A10 / OV01A1S */
+	/* Omnivision OV01A10 / OV01A1B / OV01A1S */
 	IPU_SENSOR_CONFIG("OVTI01A0", 1, 400000000),
+	IPU_SENSOR_CONFIG("OVTI01AB", 1, 400000000),
 	IPU_SENSOR_CONFIG("OVTI01AS", 1, 400000000),
 	/* Omnivision OV02C10 */
 	IPU_SENSOR_CONFIG("OVTI02C1", 1, 400000000),
-- 
2.55.0