[PATCH v2 6/9] usb: dwc3: dwc3-generic-plat: Add ST STM32MP2 DWC3 xHCI USB controller glue

[Marek Vasut]

The ST STM32MP2 SoC contains one instance of DWC3 USB controller with
glue logic wrapper around it controlled by syscon. Extend the generic
DWC3 platform driver with ST STM32MP2 glue logic specifics.

Signed-off-by: Marek Vasut <marex@xxxxxxxxxxxx>
---
Cc: Alexandre Torgue <alexandre.torgue@xxxxxxxxxxx>
Cc: Christian Bruel <christian.bruel@xxxxxxxxxxx>
Cc: Conor Dooley <conor+dt@xxxxxxxxxx>
Cc: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
Cc: Krzysztof Kozlowski <krzk+dt@xxxxxxxxxx>
Cc: Maxime Coquelin <mcoquelin.stm32@xxxxxxxxx>
Cc: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
Cc: Pankaj Dev <pankaj.dev@xxxxxx>
Cc: Rahul Kumar <rahul.kumar05@xxxxxx>
Cc: Rob Herring <robh@xxxxxxxxxx>
Cc: Rosen Penev <rosenp@xxxxxxxxx>
Cc: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
Cc: Vinod Koul <vkoul@xxxxxxxxxx>
Cc: devicetree@xxxxxxxxxxxxxxx
Cc: kernel@xxxxxxxxxxxxxxxxxx
Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
Cc: linux-kernel@xxxxxxxxxxxxxxx
Cc: linux-phy@xxxxxxxxxxxxxxxxxxx
Cc: linux-stm32@xxxxxxxxxxxxxxxxxxxxxxxxxxxx
Cc: linux-usb@xxxxxxxxxxxxxxx
---
V2: No change
---
 drivers/usb/dwc3/dwc3-generic-plat.c | 44 ++++++++++++++++++++++++++++
 1 file changed, 44 insertions(+)

diff --git a/drivers/usb/dwc3/dwc3-generic-plat.c b/drivers/usb/dwc3/dwc3-generic-plat.c
index ca69ac0eb07ce..0946ed61647b6 100644
--- a/drivers/usb/dwc3/dwc3-generic-plat.c
+++ b/drivers/usb/dwc3/dwc3-generic-plat.c
@@ -22,6 +22,12 @@
 #define EIC7700_HSP_AXI_LP_XM_CSYSREQ	BIT(0)
 #define EIC7700_HSP_AXI_LP_XS_CSYSREQ	BIT(16)
 
+#define STM32MP2_USB3DRCR_HOST_PORT_POWER_CONTROL_PRESENT	BIT(0)
+#define STM32MP2_USB3DRCR_OVRCUR_POLARITY			BIT(1)
+#define STM32MP2_USB3DRCR_VBUSEN_POLARITY			BIT(2)
+#define STM32MP2_USB3DRCR_USB2ONLYH				BIT(3)
+#define STM32MP2_USB3DRCR_USB2ONLYD				BIT(4)
+
 struct dwc3_generic {
 	struct device		*dev;
 	struct dwc3		dwc;
@@ -85,6 +91,38 @@ static int dwc3_spacemit_k1_init(struct dwc3_generic *dwc3g)
 	return 0;
 }
 
+static int dwc3_stm32mp25_init(struct dwc3_generic *dwc3g)
+{
+	struct device *dev = dwc3g->dev;
+	bool ovrcur_polarity_low = device_property_read_bool(dev, "st,ovrcur-active-low");
+	bool prt_pwr_ctrl = device_property_read_bool(dev, "st,enable-port-power-control");
+	bool usb2only_conf = device_property_match_string(dev, "phy-names", "usb3-phy") < 0;
+	bool vbusen_polarity_low = device_property_read_bool(dev, "st,vbusen-active-low");
+	struct regmap *regmap;
+	u32 drcr;
+
+	regmap = syscon_regmap_lookup_by_phandle_args(dev->of_node, "st,syscfg", 1, &drcr);
+	if (IS_ERR(regmap))
+		return dev_err_probe(dev, PTR_ERR(regmap), "No st,syscfg phandle specified\n");
+
+	return regmap_update_bits(regmap, drcr,
+				  STM32MP2_USB3DRCR_HOST_PORT_POWER_CONTROL_PRESENT |
+				  STM32MP2_USB3DRCR_OVRCUR_POLARITY |
+				  STM32MP2_USB3DRCR_VBUSEN_POLARITY |
+				  STM32MP2_USB3DRCR_USB2ONLYD |
+				  STM32MP2_USB3DRCR_USB2ONLYH,
+				  FIELD_PREP(STM32MP2_USB3DRCR_HOST_PORT_POWER_CONTROL_PRESENT,
+					     prt_pwr_ctrl) |
+				  FIELD_PREP(STM32MP2_USB3DRCR_OVRCUR_POLARITY,
+					     ovrcur_polarity_low) |
+				  FIELD_PREP(STM32MP2_USB3DRCR_VBUSEN_POLARITY,
+					     vbusen_polarity_low) |
+				  FIELD_PREP(STM32MP2_USB3DRCR_USB2ONLYD,
+					     !!usb2only_conf) |
+				  FIELD_PREP(STM32MP2_USB3DRCR_USB2ONLYH,
+					     !!usb2only_conf));
+}
+
 static int dwc3_generic_probe(struct platform_device *pdev)
 {
 	const struct dwc3_generic_config *plat_config;
@@ -231,12 +269,18 @@ static const struct dwc3_generic_config eic7700_dwc3 =  {
 	.properties = DWC3_DEFAULT_PROPERTIES,
 };
 
+static const struct dwc3_generic_config stm32mp25_dwc3 =  {
+	.init = dwc3_stm32mp25_init,
+	.properties = DWC3_DEFAULT_PROPERTIES,
+};
+
 static const struct of_device_id dwc3_generic_of_match[] = {
 	{ .compatible = "spacemit,k1-dwc3", &spacemit_k1_dwc3},
 	{ .compatible = "spacemit,k3-dwc3", },
 	{ .compatible = "fsl,ls1028a-dwc3", &fsl_ls1028_dwc3},
 	{ .compatible = "eswin,eic7700-dwc3", &eic7700_dwc3},
 	{ .compatible = "starfive,jhb100-dwc3", },
+	{ .compatible = "st,stm32mp25-dwc3", &stm32mp25_dwc3 },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, dwc3_generic_of_match);
-- 
2.53.0