Re: [PATCH v2 06/15] dt-bindings: interconnect: Add Qualcomm Kuno NoC
From: Krzysztof Kozlowski
Date: Mon Aug 17 2026 - 03:32:55 EST
On Fri, Aug 14, 2026 at 01:01:37PM +0530, Hardeep Sharma wrote:
> Document the RPMh-based Network-on-Chip interconnect providers and
> associated node-ID definitions for the Qualcomm Kuno SoC.
>
> Signed-off-by: Hardeep Sharma <hardeep.sharma@xxxxxxxxxxxxxxxx>
> ---
> .../bindings/interconnect/qcom,kuno-rpmh.yaml | 82 ++++++++++++++++++++
> include/dt-bindings/interconnect/qcom,kuno.h | 89 ++++++++++++++++++++++
> 2 files changed, 171 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/interconnect/qcom,kuno-rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,kuno-rpmh.yaml
> new file mode 100644
> index 000000000000..ffbf14356f12
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/interconnect/qcom,kuno-rpmh.yaml
> @@ -0,0 +1,82 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/interconnect/qcom,kuno-rpmh.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm RPMh Network-On-Chip Interconnect on Kuno SoC
> +
> +maintainers:
> + - Hardeep Sharma <hardeep.sharma@xxxxxxxxxxxxxxxx>
> +
> +description: |
> + RPMh interconnect providers support system bandwidth requirements through
> + RPMh hardware accelerators known as Bus Clock Manager (BCM). The provider is
> + able to communicate with the BCM through the Resource State Coordinator (RSC)
> + associated with each execution environment. Provider nodes must point to at
> + least one RPMh device child node pertaining to their RSC and each provider
> + can map to multiple RPMh resources.
> +
> + See also: include/dt-bindings/interconnect/qcom,kuno.h
> +
> +properties:
> + compatible:
> + enum:
> + - qcom,kuno-aggre-noc
> + - qcom,kuno-clk-virt
> + - qcom,kuno-cnoc-main
> + - qcom,kuno-dc-noc
> + - qcom,kuno-mc-virt
> + - qcom,kuno-mem-noc
> + - qcom,kuno-pcie-anoc
> + - qcom,kuno-system-noc
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + minItems: 1
> + maxItems: 4
> +
> + clock-names:
> + minItems: 1
> + maxItems: 4
Why are these flexible?
Look at other bindings how this is done.
Best regards,
Krzysztof