Re: [PATCH v3] of: property: add i2c-parent to fw_devlink supplier bindings

[Rob Herring]

On Mon, Aug 17, 2026 at 07:36:46PM +0000, Roman Gushchin wrote:
> Rob Herring <robh@xxxxxxxxxx> writes:
> 
> > On Sun, Aug 16, 2026 at 10:17:08PM -0700, Saravana Kannan wrote:
> >> On Sat, Aug 15, 2026 at 8:33 PM Abdurrahman Hussain
> >> <abdurrahman@xxxxxxxxxx> wrote:
> >> >
> >> > Platform-device i2c muxes (i2c-mux-reg, i2c-mux-gpio, ...) reference
> >> > the bus they multiplex with an i2c-parent phandle and hold a reference
> >> > on that adapter from probe until remove. Unlike muxes that are clients
> >> > on the parent bus, they live outside the adapter's device hierarchy,
> >> > so nothing orders their teardown against it: if the adapter's device
> >> > is unbound first — e.g. while reverting a device-tree overlay whose
> >> > changeset attached the mux nodes before the controller nodes —
> >> > i2c_del_adapter() blocks forever in
> >> > wait_for_completion(&adap->dev_released), waiting for a reference that
> >> > is only dropped later in the same teardown sequence.
> >> >
> >> > Teach fw_devlink about i2c-parent so the core creates the
> >> > corresponding device links: consumers are unbound before the parent
> >> > adapter's device, and probe ordering no longer needs -EPROBE_DEFER.
> >> >
> >> > A plain DEFINE_SIMPLE_PROP() cannot be used because the property has
> >> > two incompatible layouts: the i2c mux bindings hold a list of bare
> >> > phandles (i2c-demux-pinctrl takes several), while toshiba,tc9563 holds
> >> > a single phandle followed by an i2c slave-address cell. The two forms
> >> > are indistinguishable in the flattened tree, and a 0-cell parse of the
> >> > tc9563 form would read the slave address as a phandle, linking the
> >> > consumer to whatever node happens to carry that phandle value. Use a
> >> > custom parser that only takes entry 0 for toshiba,tc9563 nodes.
> >> >
> >> > Signed-off-by: Abdurrahman Hussain <abdurrahman@xxxxxxxxxx>
> >> > ---
> >> > Changes in v3:
> >> > - Fix the tc9563 compatible check: match "pci1179,0623" (the actual
> >> >   binding compatible) instead of "toshiba,tc9563", which never matched
> >> >   and let the bare-phandle parser misread the i2c slave-address cell as
> >> >   a phandle (Sashiko AI review)
> >> > - Link to v2: https://patch.msgid.link/20260815-b4-of-property-add-i2c-parent-v2-1-239c6da9e097@xxxxxxxxxx
> >> >
> >> > Changes in v2:
> >> > - Use a custom parser instead of DEFINE_SIMPLE_PROP: toshiba,tc9563 puts
> >> >   an i2c slave-address cell after the phandle, which a 0-cell parse
> >> >   would misread as a phandle (Sashiko AI review, Rob). Kept the full
> >> 
> >> A bit of a tangent, is this a bug in Sashiko bot?
> >> It just dropped me from the reply in the v1 patch set. Any idea why?
> 
> Hm, can you, please, clarify, what do you mean?
> https://sashiko.dev/#/patchset/20260813-b4-of-property-add-i2c-parent-v1-1-a2487e920ce1%40nexthop.ai
> has your email in to according to the email policy.

It has mine, but not Saravana's. The problem is Saravana only gets 
drivers/of/ emails and not all the bindings.

Saravana, If I enable your email, then you will get all the 
sashiko binding replies. Is that okay?

Rob