Re: [PATCH net-next v13 00/11] enic: SR-IOV V2 admin channel and MBOX protocol
From: patchwork-bot+netdevbpf
Date: Mon Aug 17 2026 - 20:51:16 EST
Hello:
This series was applied to netdev/net-next.git (main)
by Jakub Kicinski <kuba@xxxxxxxxxx>:
On Wed, 12 Aug 2026 05:48:00 -0700 you wrote:
> This series adds the admin channel infrastructure and mailbox (MBOX)
> protocol needed for V2 SR-IOV support in the enic driver.
>
> The V2 SR-IOV design uses a direct PF-VF communication channel built on
> dedicated WQ/RQ/CQ hardware resources and an MSI-X interrupt.
>
> This series touches enic_remove(), which is also modified by a fix
> already applied to net:
>
> [...]
Here is the summary with links:
- [net-next,v13,01/11] enic: verify firmware supports V2 SR-IOV at probe time
https://git.kernel.org/netdev/net-next/c/a16975e2231b
- [net-next,v13,02/11] enic: add admin channel open and close for SR-IOV
https://git.kernel.org/netdev/net-next/c/3258931d4052
- [net-next,v13,03/11] enic: add admin RQ buffer management
https://git.kernel.org/netdev/net-next/c/a0da4ea750a2
- [net-next,v13,04/11] enic: add admin CQ service with MSI-X interrupt and workqueue polling
https://git.kernel.org/netdev/net-next/c/cb1dba54c723
- [net-next,v13,05/11] enic: define MBOX message types and header structures
https://git.kernel.org/netdev/net-next/c/1584793311ce
- [net-next,v13,06/11] enic: add MBOX core send and receive for admin channel
https://git.kernel.org/netdev/net-next/c/1f0c856b5963
- [net-next,v13,07/11] enic: add MBOX PF handlers for VF register and capability
https://git.kernel.org/netdev/net-next/c/06bdfb16216b
- [net-next,v13,08/11] enic: add MBOX VF handlers for capability, register and link state
https://git.kernel.org/netdev/net-next/c/72b65c94058e
- [net-next,v13,09/11] enic: wire V2 SR-IOV enable with admin channel and MBOX
https://git.kernel.org/netdev/net-next/c/4ff204cef01e
- [net-next,v13,10/11] enic: add V2 VF probe with admin channel and PF registration
https://git.kernel.org/netdev/net-next/c/b2dfdc966b65
- [net-next,v13,11/11] enic: re-establish V2 VF admin channel and PF registration after reset
https://git.kernel.org/netdev/net-next/c/885f462fe90e
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html