[PATCH v2 2/2] iio: accel: kionix-kx022a: use iio_push_to_buffers_with_ts()

[Gabriel Rondon]

Replace the deprecated iio_push_to_buffers_with_timestamp() with
iio_push_to_buffers_with_ts(), which takes the destination buffer size
and checks it against scan_bytes at runtime.

Both push sites now use data->scan ({ __le16 channels[3]; aligned_s64
ts; }, IIO_DMA_MINALIGN aligned), which is 16 bytes and matches
scan_bytes for the 3-axis plus s64 timestamp layout used by all
supported variants, so pass sizeof(data->scan).

Signed-off-by: Gabriel Rondon <grondon@xxxxxxxxx>
---
 drivers/iio/accel/kionix-kx022a.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/iio/accel/kionix-kx022a.c b/drivers/iio/accel/kionix-kx022a.c
index cf2cb751b4e8..86f17431aa23 100644
--- a/drivers/iio/accel/kionix-kx022a.c
+++ b/drivers/iio/accel/kionix-kx022a.c
@@ -863,7 +863,8 @@ static int __kx022a_fifo_flush(struct iio_dev *idev, unsigned int samples,
 		for_each_set_bit(bit, idev->active_scan_mask, AXIS_MAX)
 			chs[bit] = sam[bit];
 
-		iio_push_to_buffers_with_timestamp(idev, &data->scan, tstamp);
+		iio_push_to_buffers_with_ts(idev, &data->scan,
+					    sizeof(data->scan), tstamp);
 
 		tstamp += sample_period;
 	}
@@ -1033,7 +1034,8 @@ static irqreturn_t kx022a_trigger_handler(int irq, void *p)
 	if (ret < 0)
 		goto err_read;
 
-	iio_push_to_buffers_with_timestamp(idev, &data->scan, data->timestamp);
+	iio_push_to_buffers_with_ts(idev, &data->scan, sizeof(data->scan),
+				    data->timestamp);
 err_read:
 	iio_trigger_notify_done(idev->trig);
 
-- 
2.50.1 (Apple Git-155)