[PATCH net v3 3/5] net: phy: set PHY_READY after LED setup

[Xuanqiang Luo]

From: Xuanqiang Luo <luoxuanqiang@xxxxxxxxxx>

phy_probe() sets PHY_READY before calling of_phy_leds(). If LED setup
fails, the error path releases the initialized resources while the PHY
state remains READY even though probing failed.

Set PHY_READY only after LED setup succeeds.

Fixes: 01e5b728e9e4 ("net: phy: Add a binding for PHY LEDs")
Signed-off-by: Xuanqiang Luo <luoxuanqiang@xxxxxxxxxx>
---
 drivers/net/phy/phy_device.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 538e9ca44d093..8fd6fbf378f0a 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -3799,9 +3799,6 @@ static int phy_probe(struct device *dev)
 				 phydev->supported);
 	}
 
-	/* Set the state to READY by default */
-	phydev->state = PHY_READY;
-
 	/* Register the PHY LED triggers */
 	if (!phydev->is_on_sfp_module)
 		phy_led_triggers_register(phydev);
@@ -3815,6 +3812,9 @@ static int phy_probe(struct device *dev)
 			goto out_unreg_led_triggers;
 	}
 
+	/* Set the state to READY by default */
+	phydev->state = PHY_READY;
+
 	return 0;
 
 out_unreg_led_triggers:
-- 
2.43.0