Re: [PATCH v6 3/5] arm64: dts: qcom: Add Kalambo CRD

[Konrad Dybcio]

On 8/10/26 10:54 AM, Gopikrishna Garmidi wrote:
> Introduce support for the CRD based on the Qualcomm Kalambo SoC. Similar
> to Mahua, it is pin-to-pin compatible with the Glymur CRD. It reuses the
> common CRD board description and drops the PMIC nodes not present on this
> design.
> 
> Kalambo uses the same QREF topology as Mahua through the qcom,mahua-tcsr
> compatible TCSR block. Connect the QREF and refgen supply inputs to the
> corresponding CRD LDOs so that the reference clocks for the PCIe and USB
> PHYs can operate.
> 
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxxxxxxxx>
> Reviewed-by: Abel Vesa <abel.vesa@xxxxxxxxxxxxxxxx>
> Signed-off-by: Gopikrishna Garmidi <gopikrishna.garmidi@xxxxxxxxxxxxxxxx>
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>

Konrad