[PATCH v4 2/4] power: sequencing: Fix build issue with COMPILE_TEST

[Biju]

From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>

The POWER_SEQUENCING_TH1520_GPU driver depends on
(ARCH_THEAD && AUXILIARY_BUS) || COMPILE_TEST. This means when
COMPILE_TEST=y and ARCH_THEAD is not set, the driver can still be
built even though it requires AUXILIARY_BUS, which may not be
selected in that configuration, leading to a build failure.

Fix this by dropping AUXILIARY_BUS from the dependency and instead
selecting it directly, so the dependency is satisfied regardless of
whether COMPILE_TEST or ARCH_THEAD is enabled.

Fixes: 1a7312b93ab0 ("power: sequencing: extend build coverage with COMPILE_TEST=y")
Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
---
v4:
 * New patch.
---
 drivers/power/sequencing/Kconfig | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/power/sequencing/Kconfig b/drivers/power/sequencing/Kconfig
index 1c5f5820f5b7..226c62704d9b 100644
--- a/drivers/power/sequencing/Kconfig
+++ b/drivers/power/sequencing/Kconfig
@@ -29,7 +29,8 @@ config POWER_SEQUENCING_QCOM_WCN
 
 config POWER_SEQUENCING_TH1520_GPU
 	tristate "T-HEAD TH1520 GPU power sequencing driver"
-	depends on (ARCH_THEAD && AUXILIARY_BUS) || COMPILE_TEST
+	depends on ARCH_THEAD || COMPILE_TEST
+	select AUXILIARY_BUS
 	help
 	  Say Y here to enable the power sequencing driver for the TH1520 SoC
 	  GPU. This driver handles the complex clock and reset sequence
-- 
2.43.0