Re: [PATCH v2 2/2] iio: accel: kionix-kx022a: use iio_push_to_buffers_with_ts()

[Jonathan Cameron]

On Wed, 19 Aug 2026 08:11:45 +0300
Matti Vaittinen <mazziesaccount@xxxxxxxxx> wrote:

> On 19/08/2026 00:51, Gabriel Rondon wrote:
> > Replace the deprecated iio_push_to_buffers_with_timestamp() with
> > iio_push_to_buffers_with_ts(), which takes the destination buffer size
> > and checks it against scan_bytes at runtime.
> > 
> > Both push sites now use data->scan ({ __le16 channels[3]; aligned_s64
> > ts; }, IIO_DMA_MINALIGN aligned), which is 16 bytes and matches
> > scan_bytes for the 3-axis plus s64 timestamp layout used by all
> > supported variants, so pass sizeof(data->scan).  
> 
> Eh, what is this explanation above? As far as I understand, the 
> iio_push_to_buffers_with_ts() has a safety mechanism of checking the 
> passed buffer size. So, size of the buffer must be passed, no matter 
> what the buffer is designed to contain.
Fair point - this evolved in an odd direction. Dropped that paragraph.
> 
> By the way, to my eye the commit message looks AI generated, which is 
> perfectly fine. But AFAICS, AI generated patches should be tagged as AI 
> generated. Hence, if you use AI to do the changes, please ask the AI to 
> check the docs and also add necessary tags :)
> 
> > Signed-off-by: Gabriel Rondon <grondon@xxxxxxxxx>  
> 
> Other than the commit message:
> Reviewed-by: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
> 
> > ---
> >   drivers/iio/accel/kionix-kx022a.c | 6 ++++--
> >   1 file changed, 4 insertions(+), 2 deletions(-)
> > 
> > diff --git a/drivers/iio/accel/kionix-kx022a.c b/drivers/iio/accel/kionix-kx022a.c
> > index cf2cb751b4e8..86f17431aa23 100644
> > --- a/drivers/iio/accel/kionix-kx022a.c
> > +++ b/drivers/iio/accel/kionix-kx022a.c
> > @@ -863,7 +863,8 @@ static int __kx022a_fifo_flush(struct iio_dev *idev, unsigned int samples,
> >   		for_each_set_bit(bit, idev->active_scan_mask, AXIS_MAX)
> >   			chs[bit] = sam[bit];
> >   
> > -		iio_push_to_buffers_with_timestamp(idev, &data->scan, tstamp);
> > +		iio_push_to_buffers_with_ts(idev, &data->scan,
> > +					    sizeof(data->scan), tstamp);
> >   
> >   		tstamp += sample_period;
> >   	}
> > @@ -1033,7 +1034,8 @@ static irqreturn_t kx022a_trigger_handler(int irq, void *p)
> >   	if (ret < 0)
> >   		goto err_read;
> >   
> > -	iio_push_to_buffers_with_timestamp(idev, &data->scan, data->timestamp);
> > +	iio_push_to_buffers_with_ts(idev, &data->scan, sizeof(data->scan),
> > +				    data->timestamp);
> >   err_read:
> >   	iio_trigger_notify_done(idev->trig);
> >     
> 
>