[tip: irq/urgent] irqchip/irq-realtek-rtl: Use readl_be()/writel_be() instead of readl()/writel()

[tip-bot2 for Rustam Adilov]

The following commit has been merged into the irq/urgent branch of tip:

Commit-ID:     58b34b72b64bfbfc5f8ad4d8f229942aff76597e
Gitweb:        https://git.kernel.org/tip/58b34b72b64bfbfc5f8ad4d8f229942aff76597e
Author:        Rustam Adilov <adilov@xxxxxxxxxxx>
AuthorDate:    Thu, 20 Aug 2026 21:20:17 +05:00
Committer:     Thomas Gleixner <tglx@xxxxxxxxxx>
CommitterDate: Thu, 20 Aug 2026 18:34:59 +02:00

irqchip/irq-realtek-rtl: Use readl_be()/writel_be() instead of readl()/writel()

When CONFIG_SWAP_IO_SPACE is enabled, readl() performs a swap from little
endian device to big endian CPU and vice versa for writel().

This is incorrect for Realtek Interrupt controller as that is a big endian
device and so the LE to BE conversions are unwanted.

Fix this by converting the MMIO accesses to readl_be() and writel_be().

Fixes: 9f3a0f34b84a ("irqchip: Add support for Realtek RTL838x/RTL839x interrupt controller")
Signed-off-by: Rustam Adilov <adilov@xxxxxxxxxxx>
Signed-off-by: Thomas Gleixner <tglx@xxxxxxxxxx>
Tested-by: Carlo Szelinsky <github@xxxxxxxxxxxx>
Link: https://patch.msgid.link/20260820162017.28507-1-adilov@xxxxxxxxxxx
---
 drivers/irqchip/irq-realtek-rtl.c | 20 +++++++++++++-------
 1 file changed, 13 insertions(+), 7 deletions(-)

diff --git a/drivers/irqchip/irq-realtek-rtl.c b/drivers/irqchip/irq-realtek-rtl.c
index c8becb4..26e52c3 100644
--- a/drivers/irqchip/irq-realtek-rtl.c
+++ b/drivers/irqchip/irq-realtek-rtl.c
@@ -1,5 +1,10 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
+ * Realtek Interrupt controller.
+ *
+ * The Realtek Interrupt controller is a big endian device found in the
+ * Realtek MIPS SoCs.
+ *
  * Copyright (C) 2020 Birger Koblitz <mail@xxxxxxxxxxxxxxxxx>
  * Copyright (C) 2020 Bert Vermeulen <bert@xxxxxxxx>
  * Copyright (C) 2020 John Crispin <john@xxxxxxxxxxx>
@@ -50,18 +55,18 @@ static inline void enable_gimr(unsigned int cpu, unsigned int hw_irq)
 {
 	u32 gimr;
 
-	gimr = readl(REG(cpu, RTL_ICTL_GIMR));
+	gimr = readl_be(REG(cpu, RTL_ICTL_GIMR));
 	gimr |= BIT(hw_irq);
-	writel(gimr, REG(cpu, RTL_ICTL_GIMR));
+	writel_be(gimr, REG(cpu, RTL_ICTL_GIMR));
 }
 
 static inline void disable_gimr(unsigned int cpu, unsigned int hw_irq)
 {
 	u32 gimr;
 
-	gimr = readl(REG(cpu, RTL_ICTL_GIMR));
+	gimr = readl_be(REG(cpu, RTL_ICTL_GIMR));
 	gimr &= ~BIT(hw_irq);
-	writel(gimr, REG(cpu, RTL_ICTL_GIMR));
+	writel_be(gimr, REG(cpu, RTL_ICTL_GIMR));
 }
 
 static void write_irr(unsigned int cpu, int hw_irq, u32 value)
@@ -71,9 +76,9 @@ static void write_irr(unsigned int cpu, int hw_irq, u32 value)
 	unsigned int shift = IRR_SHIFT(hw_irq);
 	u32 irr;
 
-	irr = readl(irr0 + offset) & ~(0xf << shift);
+	irr = readl_be(irr0 + offset) & ~(0xf << shift);
 	irr |= (value & 0xf) << shift;
-	writel(irr, irr0 + offset);
+	writel_be(irr, irr0 + offset);
 }
 
 static void realtek_ictl_unmask_irq(struct irq_data *i)
@@ -159,7 +164,8 @@ static void realtek_irq_dispatch(struct irq_desc *desc)
 	unsigned int hw_irq;
 
 	chained_irq_enter(chip, desc);
-	pending = readl(REG(cpu, RTL_ICTL_GIMR)) & readl(REG(cpu, RTL_ICTL_GISR)) & output->mask;
+	pending = readl_be(REG(cpu, RTL_ICTL_GIMR)) &
+		  readl_be(REG(cpu, RTL_ICTL_GISR)) & output->mask;
 
 	if (unlikely(!pending)) {
 		spurious_interrupt();