Re: [PATCH v2 0/3] arm64: dts: qcom: shikra: Add CYPD6129/CYPD6229 Type-C controller support

[Abel Vesa]

On 26-08-21 15:56:49, Akash Kumar wrote:
> This series adds support for the Cypress cypd6129/cypd6229 dual
> Type-C PD controllers used on the Shikra CQM/CQS/IQS platforms to
> handle usb-role-switch, and wires up the corresponding DT nodes.
> 
> Changes in v2:
> - dt-bindings: add a top-level "wakeup-source" property on the
>   controller node (matching richtek,rt1719.yaml/ti,tps6598x.yaml) and
>   move "wakeup-source;" in the example out of "connector@0" onto the
>   parent node, since usb-connector.yaml ends in
>   "unevaluatedProperties: false" and does not itself declare
>   "wakeup-source" -- placing it inside the connector node fails
>   dtbs_check. Also fixed related whitespace nitpicks in the example.
> - dts: apply the same wakeup-source relocation to all three affected
>   boards (shikra-cqm-evk, shikra-cqs-evk, shikra-iqs-evk).
> - dts: fix shikra-iqs-evk's cypd6229 node to use the
>   "cypress,cypd6229", "cypress,cypd6129" fallback compatible string
>   pair required by the binding, instead of "cypress,cypd6229" alone.
> - dts: fix shikra-cqm-evk/shikra-cqs-evk wiring so CYPD6129 connects
>   to usb_2_dwc3_hs (secondary port) and PM4125's built-in typec
>   connects to usb_1_dwc3_hs/pm4125_hs_in (primary port), and add the
>   missing reverse remote-endpoint links on pm4125_hs_in/pm4125_ss_in.
> - No changes to patch 2/3 (driver match table).
> 
> Link to v1: https://lore.kernel.org/all/20260820145036.2035641-1-akash.kumar@xxxxxxxxxxxxxxxx/
> 
> Signed-off-by: Akash Kumar <akash.kumar@xxxxxxxxxxxxxxxx>

Please do not send as reply to earlier revisions.