[PATCH 3/5] HID: hid-lenovo-go: record calibration completion state

[Aditya Dash]

The firmware uses result value 0 for failure and 1 for success. The driver
stores this value directly as a state index. Index 0 means unknown, so the
driver reports a firmware failure as unknown.

Map the result value to the matching failure or success state.

Fixes: 995887a10da1 ("HID: hid-lenovo-go: Add Calibration Settings")
Assisted-by: Pi:gpt-5.6-sol
Signed-off-by: Aditya Dash <mradityadash@xxxxxxxxx>
---
A successful calibration completion was tested on hardware. No final
failure completion was captured.

 drivers/hid/hid-lenovo-go.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/drivers/hid/hid-lenovo-go.c b/drivers/hid/hid-lenovo-go.c
index a6e9a130ad41..d2d134873dd1 100644
--- a/drivers/hid/hid-lenovo-go.c
+++ b/drivers/hid/hid-lenovo-go.c
@@ -577,17 +577,19 @@ static int hid_go_light_event(struct command_report *cmd_rep)
 
 static int hid_go_device_status_event(struct command_report *cmd_rep)
 {
+	u8 status = cmd_rep->data[1] ? CAL_STAT_SUCCESS : CAL_STAT_FAILURE;
+
 	switch (cmd_rep->device_type) {
 	case LEFT_CONTROLLER:
 		switch (cmd_rep->data[0]) {
 		case CALDEV_GYROSCOPE:
-			drvdata.gp_left_gyro_cal_status = cmd_rep->data[1];
+			drvdata.gp_left_gyro_cal_status = status;
 			return 0;
 		case CALDEV_JOYSTICK:
-			drvdata.gp_left_joy_cal_status = cmd_rep->data[1];
+			drvdata.gp_left_joy_cal_status = status;
 			return 0;
 		case CALDEV_TRIGGER:
-			drvdata.gp_left_trigg_cal_status = cmd_rep->data[1];
+			drvdata.gp_left_trigg_cal_status = status;
 			return 0;
 		default:
 			return -EINVAL;
@@ -596,13 +598,13 @@ static int hid_go_device_status_event(struct command_report *cmd_rep)
 	case RIGHT_CONTROLLER:
 		switch (cmd_rep->data[0]) {
 		case CALDEV_GYROSCOPE:
-			drvdata.gp_right_gyro_cal_status = cmd_rep->data[1];
+			drvdata.gp_right_gyro_cal_status = status;
 			return 0;
 		case CALDEV_JOYSTICK:
-			drvdata.gp_right_joy_cal_status = cmd_rep->data[1];
+			drvdata.gp_right_joy_cal_status = status;
 			return 0;
 		case CALDEV_TRIGGER:
-			drvdata.gp_right_trigg_cal_status = cmd_rep->data[1];
+			drvdata.gp_right_trigg_cal_status = status;
 			return 0;
 		default:
 			return -EINVAL;
-- 
2.55.0