Re: [PATCH] docs: iio: Correct ADXL380 filter descriptions

[David Lechner]

On 8/22/26 12:00 PM, Randy Dunlap wrote:
> Hi,
> 
> On 8/22/26 12:36 AM, Karl Mehltretter wrote:
>> The high-pass attributes were described as low-pass filters and vice
>> versa. Correct all four descriptions.
>>
>> Fixes: b6a097a9af00 ("docs: iio: add documentation for adxl380 driver")
>> Assisted-by: Codex:gpt-5.6-sol
>> Signed-off-by: Karl Mehltretter <kmehltretter@xxxxxxxxx>
>> ---
>>  Documentation/iio/adxl380.rst | 8 ++++----
>>  1 file changed, 4 insertions(+), 4 deletions(-)
>>
>> diff --git a/Documentation/iio/adxl380.rst b/Documentation/iio/adxl380.rst
>> index 654d4c0e84a19..a1c249dc2e51c 100644
>> --- a/Documentation/iio/adxl380.rst
>> +++ b/Documentation/iio/adxl380.rst
>> @@ -39,13 +39,13 @@ specific device folder path ``/sys/bus/iio/devices/iio:deviceX``.
>>  +---------------------------------------------------+----------------------------------------------------------+
>>  | in_accel_scale                                    | Scale for the accelerometer channels.                    |
>>  +---------------------------------------------------+----------------------------------------------------------+
>> -| in_accel_filter_high_pass_3db_frequency           | Low pass filter bandwidth.                               |
>> +| in_accel_filter_high_pass_3db_frequency           | High pass filter bandwidth.                              |
>>  +---------------------------------------------------+----------------------------------------------------------+
>> -| in_accel_filter_high_pass_3db_frequency_available | Available low pass filter bandwidth configurations.      |
>> +| in_accel_filter_high_pass_3db_frequency_available | Available high pass filter bandwidth configurations.     |
>>  +---------------------------------------------------+----------------------------------------------------------+
>> -| in_accel_filter_low_pass_3db_frequency            | High pass filter bandwidth.                              |
>> +| in_accel_filter_low_pass_3db_frequency            | Low pass filter bandwidth.                               |
>>  +---------------------------------------------------+----------------------------------------------------------+
>> -| in_accel_filter_low_pass_3db_frequency_available  | Available high pass filter bandwidth configurations.     |
>> +| in_accel_filter_low_pass_3db_frequency_available  | Available low pass filter bandwidth configurations.      |
>>  +---------------------------------------------------+----------------------------------------------------------+
>>  | in_accel_x_calibbias                              | Calibration offset for the X-axis accelerometer channel. |
>>  +---------------------------------------------------+----------------------------------------------------------+
> 
> These changes LGTM. Thanks.
> 
> Although I am a bit confused. When I look at the adxl380 driver,
> I don't see any of these device attributes.
> The attributes with these names are in other drivers/iio/accel/
> drivers: bma180.c, mma8452.c, and sca3000.c
> Can someone try to explain this, please?
> thanks.
> 

The attributes come from:

	.info_mask_shared_by_type =					\
		BIT(IIO_CHAN_INFO_SCALE) |				\
		BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY) |	\
		BIT(IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY),	\
	.info_mask_shared_by_type_available =				\
		BIT(IIO_CHAN_INFO_SCALE) |				\
		BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY) |	\
		BIT(IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY),	\

in adxl380.c