Re: [PATCH] docs: iio: Correct ADXL380 filter descriptions

[Jonathan Cameron]

On Sat, 22 Aug 2026 11:19:09 -0700
Randy Dunlap <rdunlap@xxxxxxxxxxxxx> wrote:

> On 8/22/26 11:07 AM, David Lechner wrote:
> > On 8/22/26 12:00 PM, Randy Dunlap wrote:  
> >> Hi,
> >>
> >> On 8/22/26 12:36 AM, Karl Mehltretter wrote:  
> >>> The high-pass attributes were described as low-pass filters and vice
> >>> versa. Correct all four descriptions.
> >>>
> >>> Fixes: b6a097a9af00 ("docs: iio: add documentation for adxl380 driver")
> >>> Assisted-by: Codex:gpt-5.6-sol
> >>> Signed-off-by: Karl Mehltretter <kmehltretter@xxxxxxxxx>
> >>> ---
> >>>  Documentation/iio/adxl380.rst | 8 ++++----
> >>>  1 file changed, 4 insertions(+), 4 deletions(-)
> >>>
> >>> diff --git a/Documentation/iio/adxl380.rst b/Documentation/iio/adxl380.rst
> >>> index 654d4c0e84a19..a1c249dc2e51c 100644
> >>> --- a/Documentation/iio/adxl380.rst
> >>> +++ b/Documentation/iio/adxl380.rst
> >>> @@ -39,13 +39,13 @@ specific device folder path ``/sys/bus/iio/devices/iio:deviceX``.
> >>>  +---------------------------------------------------+----------------------------------------------------------+
> >>>  | in_accel_scale                                    | Scale for the accelerometer channels.                    |
> >>>  +---------------------------------------------------+----------------------------------------------------------+
> >>> -| in_accel_filter_high_pass_3db_frequency           | Low pass filter bandwidth.                               |
> >>> +| in_accel_filter_high_pass_3db_frequency           | High pass filter bandwidth.                              |
> >>>  +---------------------------------------------------+----------------------------------------------------------+
> >>> -| in_accel_filter_high_pass_3db_frequency_available | Available low pass filter bandwidth configurations.      |
> >>> +| in_accel_filter_high_pass_3db_frequency_available | Available high pass filter bandwidth configurations.     |
> >>>  +---------------------------------------------------+----------------------------------------------------------+
> >>> -| in_accel_filter_low_pass_3db_frequency            | High pass filter bandwidth.                              |
> >>> +| in_accel_filter_low_pass_3db_frequency            | Low pass filter bandwidth.                               |
> >>>  +---------------------------------------------------+----------------------------------------------------------+
> >>> -| in_accel_filter_low_pass_3db_frequency_available  | Available high pass filter bandwidth configurations.     |
> >>> +| in_accel_filter_low_pass_3db_frequency_available  | Available low pass filter bandwidth configurations.      |
> >>>  +---------------------------------------------------+----------------------------------------------------------+
> >>>  | in_accel_x_calibbias                              | Calibration offset for the X-axis accelerometer channel. |
> >>>  +---------------------------------------------------+----------------------------------------------------------+  
> >>
> >> These changes LGTM. Thanks.
> >>
> >> Although I am a bit confused. When I look at the adxl380 driver,
> >> I don't see any of these device attributes.
> >> The attributes with these names are in other drivers/iio/accel/
> >> drivers: bma180.c, mma8452.c, and sca3000.c
> >> Can someone try to explain this, please?
> >> thanks.
> >>  
> > 
> > The attributes come from:
> > 
> > 	.info_mask_shared_by_type =					\
> > 		BIT(IIO_CHAN_INFO_SCALE) |				\
> > 		BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY) |	\
> > 		BIT(IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY),	\
> > 	.info_mask_shared_by_type_available =				\
> > 		BIT(IIO_CHAN_INFO_SCALE) |				\
> > 		BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY) |	\
> > 		BIT(IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY),	\
> > 
> > in adxl380.c  
> 
> Thanks, David.
> 
> for the patch:
> Acked-by: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
> 
Applied to the testing branch of iio.git.

That will get rebased on rc1 once available.

Thanks,

Jonathan