[PATCH 2/2] usb: dwc3: qcom: Allow the glue layer to pass ref_clk to the core

[Varadarajan Narayanan]

The dwc3-qcom glue layer sets probe_data.ignore_clocks_and_resets before
calling dwc3_core_probe(), so the DWC3 core does not acquire ref_clk on its
own. This prevents dwc3_ref_clk_period() from programming GUCTL and GFLADJ
from the reference clock rate.

The deprecated snps,ref-clock-period-ns property is not a suitable
replacement on IPQ9650. Its 24 MHz reference clock has a period of about
41.66 ns, while using 41 ns makes the calculated FLADJ value become 0 and
leaves the reference clock configuration incorrect.

Allow the Qualcomm glue driver to provide ref_clk to the DWC3 core for
platforms that may need it.

Signed-off-by: Varadarajan Narayanan <varadarajan.narayanan@xxxxxxxxxxxxxxxx>
---
 drivers/usb/dwc3/dwc3-qcom.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
index ac68b4218b56..2d6de6469c1e 100644
--- a/drivers/usb/dwc3/dwc3-qcom.c
+++ b/drivers/usb/dwc3/dwc3-qcom.c
@@ -705,6 +705,13 @@ static int dwc3_qcom_probe(struct platform_device *pdev)
 	probe_data.res = &res;
 	probe_data.ignore_clocks_and_resets = true;
 	probe_data.properties = DWC3_DEFAULT_PROPERTIES;
+
+	qcom->dwc.ref_clk = devm_clk_get_optional(dev, "ref_clk");
+	if (IS_ERR_OR_NULL(qcom->dwc.ref_clk)) {
+		qcom->dwc.ref_clk = NULL;
+		dev_info(dev, "NOT setting dwc.ref_clk\n");
+	}
+
 	ret = dwc3_core_probe(&probe_data);
 	if (ret)  {
 		ret = dev_err_probe(dev, ret, "failed to register DWC3 Core\n");

-- 
2.34.1